Free vibration of cylindrical shells and panels with cutout via the differential transform method | Farzad Shahabian Moghadam,Ahmad Aftabi Sani | |
Plastic Cyclic Analysis Using Linear Yield Surface | Mohaamad Rezaiee Pajand | 1984-5 |
stability of one bay symmetrical frames with nonouniform members | Fereidoon Irani | 1988-11 |
Gable Frame Analysis Using Iteration Procedure | Mohaamad Rezaiee Pajand | 1990-7 |
Optimal capacity of axially loaded bent pile | Mohaamad Rezaiee Pajand | 1990-8 |
Three-dimensional sensitivity analysis using a factoring technique | Mohaamad Rezaiee Pajand | 1993-10 |
Reinforced Concrete Columns in Tortion | Fereidoon Irani | 1993-11 |
Nonprismatic beam and column design tables for nanlinear analysis | Mohaamad Rezaiee Pajand | 1995-7 |
Two-dimensional sensitivity analysis | Mohaamad Rezaiee Pajand | 1996-11 |
A family of 13-node plate bending triangular elements | Mohaamad Rezaiee Pajand | 1998-2 |
Local Bond Strength of Reinforcing Bars in Normal Strength and High Strength Concrete (HSC) | Mohammad Reza Esfahani | 1998-4 |
Bond between Normal Strength and High Strength Concrete (HSC) and reinforcing Bars in Splices in Beams | Mohammad Reza Esfahani | 1998-6 |
A variable arc-length method | Mohaamad Rezaiee Pajand | 1999-5 |
Buckling of slender web plates subjected to combinations of in-plane loading | Farzad Shahabian Moghadam | 1999-12 |
combined shear-and-patch loading of plate girders | Farzad Shahabian Moghadam | 2000-1 |
design procedures for combined shear and patch loading of plate girders | Farzad Shahabian Moghadam | 2000-1 |
On the performance of a salt gradient solar pond | Mohammad Reza Jaefarzadeh | 2000-1 |
Explicit stiffness of tapered and monosymmertic i beam-columns | Mohaamad Rezaiee Pajand | 2000-5 |
EXPLICIT STIFFNESS OF TAPERED AND MONOSYMMETRIC I BEAM-COLUMNS | Mohaamad Rezaiee Pajand | 2000-5 |
Energy and momentum in one dimensional open channel flow | Seyed Mahmood Hosseini | 2000-6 |
Influence of transverse reinforcement on bond strength of tensile splices | Mohammad Reza Esfahani | 2000-6 |
ultimate resistance of slender web panels to combined bending shear and patch loading | Farzad Shahabian Moghadam | 2001-1 |
Shape optimization of plate bending structures | Mohaamad Rezaiee Pajand | 2001-5 |
Galvanic Corrossion of Carbon And Steel in Aggressive Environments | Mohammadreza Tavakkolizadeh | 2001-8 |
exact method of analysis of shear lag in framed tube structures | Hassan Haji Kazemi | 2002-1 |
A genetic algorithm for structural optimization | Mohaamad Rezaiee Pajand | 2002-1 |
The cost Effectiveness of Investment in Traffic Safety Projects in Iran | Esmaeel Ayati | 2002-2 |
Variability of Hydraulic Parameters in Coarse Pourous Media | Seyed Mahmood Hosseini | 2002-2 |
Estimation of the Cost of Rural Road Crashes in a Developing country | Esmaeel Ayati | 2002-2 |
On the Performance of Different Empirical Loss Equations for Flow Through Coarse Porous Media | Seyed Mahmood Hosseini | 2002-2 |
TOWARDS THE DESIGN OF LOW MAINTENANCE SALINITY GRADIENTSOLAR PONDS | Mohammad Reza Jaefarzadeh | 2002-11 |
elasto-plastic analysis of three-dimensional structures | Mohaamad Rezaiee Pajand | 2002-12 |
evaluation of the methods for gradient establishment in salinity gradient solar ponds | Mohammad Reza Jaefarzadeh | 2003-1 |
Strengthening of Steel-Concrete Composite Girders Using Carbon Fiber Reinforced Polymers Sheets | Mohammadreza Tavakkolizadeh | 2003-1 |
Fatigue Strength of Steel Girders Strengthened with Carbon Fiber Reinforced Polymer Patch | Mohammadreza Tavakkolizadeh | 2003-2 |
Elasto‐plastic analysis of three‐dimensional structures | Mohaamad Rezaiee Pajand | 2003-5 |
Repair of Damaged Steel-Concrete Composite Girders Using Carbon Fiber-Reinforced Polymer Sheets | Mohammadreza Tavakkolizadeh | 2003-11 |
Development/splice length of reinforcing bars | Mohammad Reza Esfahani | 2004-2 |
Equations for Discharge Calculation in Compound Channels having Homogeneous Roughness | Seyed Mahmood Hosseini | 2004-2 |
The Comparison Of Analytical Approaches And Road Crash Costs In Iran And Australia | Esmaeel Ayati | 2004-2 |
A comparison between bond strength of steel and GFRP bars in self-consolidating concrete (SCC) | Mohammad Reza Esfahani | 2004-4 |
Axial compressive strength of reinforced concrete columns wrapped with Fiber Reinforced Polymers (FRP) | Mohammad Reza Esfahani | 2004-4 |
A PROPOSED METHOD TO EVALUATE ULTIMATE RESISTANCE OF PLATE GIRDERS SUBJECTED TO SHEAR AND PATCH LOAD | Farzad Shahabian Moghadam,Hassan Haji Kazemi | 2004-5 |
Thermal behavior of a small salinity-gradient solar pond with wall shading effect | Mohammad Reza Jaefarzadeh | 2004-9 |
FLOOD ZONING USING THE HEC-RASHYDRAULIC MODEL IN A GISENVIRONMENT | Mohammad Bagher Sharifi | 2005-2 |
THERMAL BEHAVIOR OF ALARGE SALINITY-GRADIENT SOLAR POND IN THE CITY OF MASHHAD | Mohammad Reza Jaefarzadeh | 2005-3 |
A New Investigation on the Performance of Rainfall IDF Models | Seyed Mahmood Hosseini | 2005-6 |
Bond strength of glass fiber reinforced polymer reinforcing bars in normal and self-consolidation concrete | Mohammad Reza Esfahani | 2005-6 |
A simple model for estimation of dimensionless isovel contours in open | Mahmoud Faghfour Maghrebi | 2005-12 |
Computation of multiple bifurcation point | Mohaamad Rezaiee Pajand | 2006-3 |
Prediction of stage-discharge curves in open-channels using a fixed-point velocity measurement | Mahmoud Faghfour Maghrebi | 2006-3 |
Soft Computing-based Nonlinear Fusion Algorithms for Describing Non-Darcy Flow in Porous Media | Seyed Mahmood Hosseini | 2006-3 |
Water Quality Improvement through Bioretention Media: Nitrogen and Phosphorus Removal | Mohammad SHokouhian | 2006-3 |
Punching shear strength of reinforced concrete slabs strengthened with glass fiber-reinforced polymer laminates. Paper by Cheng-Chin Chen and Chung-Yan Li, Discussion | Mohammad Reza Esfahani | 2006-5 |
Tensile crack modeling cohesive slopes and vertical cuts | Mohaamad Rezaiee Pajand | 2006-7 |
Performance Evaluation of Precast Beam-to-Column Concrete Connection Using Pushover Analysis | Hashem Shariatmadar | 2006-8 |
Streamwise velocity distribution in irregular shaped channels having | Mahmoud Faghfour Maghrebi | 2006-8 |
Using 3D Fuzzy topological relationships for Checking of Spatial Relations between Dynamic Air Pollution Cloud and City Population Density | Rouzbeh Shad | 2006-8 |
Calibration of Hydraulic Parameters for Flow through Rockfill Structures | Seyed Mahmood Hosseini | 2006-9 |
Application of the single point measurement in discharge estimation | Mahmoud Faghfour Maghrebi | 2006-10 |
New Method for Estimation of Discharge | Mahmoud Faghfour Maghrebi | 2006-10 |
Heat extraction from a salinity-gradient solar pond using in pond heat exchanger | Mohammad Reza Jaefarzadeh | 2006-11 |
NONLINEAR ANALYSIS OF TRUSS STRUCTURES USING DYNAMIC RELAXATION | Mohaamad Rezaiee Pajand | 2006-11 |
Safety and cost-effectiveness of clear zones on Iran | Esmaeel Ayati | 2007-2 |
Accurate integration scheme for von-Mises plasticity with mixed-hardening based on exponential maps | Mohaamad Rezaiee Pajand | 2007-3 |
DECISION AID FOR ALLOCATION OF TRANSPORTATION FUNDS TO ROADSIDE SAFETY ENHANCEMENT | Esmaeel Ayati | 2007-3 |
The effect of entrance geometry on discharge coefficient in colverts | Jalil Abrishami | 2007-3 |
Flexural behavior of reinforced concrete beams strengthened by CFRP sheets | Mohammad Reza Esfahani | 2007-6 |
A Comparison Between Complexity and Temporal GIS Models for Spatio-temporal Urban Applications | Rouzbeh Shad | 2007-7 |
Behavior of coupling beams Strengthened with CFRP Sheets | Mohammad Reza Esfahani | 2007-7 |
Designing a mathematical model for predicting the mechanical characteristics of asphalt pavements using dynamic loading | Ali Sahaf | 2007-9 |
Corrosion effects on tension stiffening behavior of reinforced concrete | Mansour Ghalehnovi | 2007-10 |
Linear dynamic analysis of arch dams utilizing modified efficient fluid hyper-element | Ahmad Aftabi Sani | 2007-10 |
Water Hammer Modeling by Godunov type Finite Volume Method | Ali Abbasi | 2007-11 |
Development of an unsteady model for flow through coarse heterogeneous porous | Seyed Mahmood Hosseini | 2007-12 |
Behaviour of plate girders subjected to combined bending and shear loading | Farzad Shahabian Moghadam | 2008-2 |
Elasto-Plastic Analysis of Trusses by Virtual Loads | Mohaamad Rezaiee Pajand | 2008-3 |
Nonlinear dynamic analysis by Dynamic Relaxation method | Mohaamad Rezaiee Pajand | 2008-3 |
nonlinear dynamic analysis by dynamic relaxtion method | Mohaamad Rezaiee Pajand | 2008-3 |
Accuracy of Energy and Momentum Principles for Gradually Varied Analysis of Flow through Compound Channels | Seyed Mahmood Hosseini | 2008-6 |
Implicit Higher-Order Accuracy Method for Numerica Integration in Dynamic Analysisl | Mohaamad Rezaiee Pajand | 2008-6 |
Numerical time integrationfor dynamic analysis using a newhigher order predictor-corrector method | Mohaamad Rezaiee Pajand | 2008-6 |
Top bar effect of steel bars in self-consolidating concrete (SCC) | Mohammad Reza Esfahani | 2008-6 |
Evaluating the effects of production inputs and insurance protection policy on income equality of wheat producers in Khorasan provinces | Shanaz Danesh | 2008-7 |
Masonry Infilling Effect on Seismic Vulnerability and Performance Level of High Ductility RC Frames | Mansour Ghalehnovi | 2008-7 |
Seismic Vulnerability and Performance Level of Confined Brick Walls | Mansour Ghalehnovi | 2008-7 |
Effect of cyclic loading on punching shear strength of slabs strengthened with CFRP sheets | Mohammad Reza Esfahani | 2008-8 |
Proposed Dynamic Soil Pressure Diagram on Rigid Walls | -Kazem -Moslem,Ahmad Shooshtari | 2008-9 |
On the integration schemes for Drucker–Prager’s elastoplastic models based on exponential maps | Mohaamad Rezaiee Pajand | 2008-10 |
Semi-active control of structures using neuro-predictive algorithm for MR dampers | Abbas Karamodin,Hassan Haji Kazemi | 2008-12 |
Studies on damage and FRP strengthening of reinforced concrete beams by vibration monitoring | Mohammad Reza Esfahani,-Kazem -Moslem | 2009-1 |
A New Approach for Modeling Spatio-Temporal Events in an Earthquake
Rescue Scenario | Rouzbeh Shad | 2009-2 |
Evaluation of Spatial Parallel Genetic Algorithms for Real Time Routing in Geographic Information System | Rouzbeh Shad | 2009-2 |
On the calibration of the Chaboche hardening model and a modified hardening rule for uniaxial ratcheting prediction | Mohaamad Rezaiee Pajand | 2009-4 |
Semi-active control of structures using a neuro-inverse model of MR dampers | Abbas Karamodin,Hassan Haji Kazemi | 2009-5 |
New method for determination of depth-averaged velocity for estimation of longitudinal despersion in natural rivers | Mahmoud Faghfour Maghrebi,Jalil Abrishami | 2009-6 |
Discharge Estimation by the Aid of Isovel Contours in a Tidal River with Partially Reverse Flow | Mahmoud Faghfour Maghrebi | 2009-6 |
punching shear strength of interior slab-column connnections strengthened with carbon fiber reinforced polymer sheets | Mohammad Reza Esfahani | 2009-7 |
Accurate Water Hammer Pressure Modeling for Trial Modification of Stress Distribution Along Multi Segments Pipeline | Ali Abbasi | 2009-8 |
Experimental Investigations Water Surface Characteristics in Strongly-Curved Open Channels | Jalil Abrishami,Mohammad Bagher Sharifi | 2009-8 |
Direct Adaptive Neurocontrol of Structures under Earth Vibration | Mohaamad Rezaiee Pajand | 2009-9 |
Prediction of pile settlement using artificial neural networks based on standard penetration test data | Fereydoon Pooya Nejad,Mohammad Reza Kakhi | 2009-9 |
Fuzzy topological simulation for deducing in GIS | Rouzbeh Shad | 2009-10 |
Some Geometrical Bases for Incremental-Iterative Methods | Mohaamad Rezaiee Pajand | 2009-10 |
Predicting air pollution using fuzzy genetic linear membership kriging in GIS | Rouzbeh Shad | 2009-11 |
Using GIS to Develop an Efficient Spatio-temporal Task Allocation Algorithm to Human Groups in an Entirely Dynamic Environment Case Study: Earthquake Rescue Teams | Rouzbeh Shad | 2009-11 |
A simplified two-phase macroscopic model for reinforced soils | Ehsan Seyedi Hosseininia | 2009-12 |
An Intelligent Fuzzy Agent for Spatial Reasoning in GIS | Rouzbeh Shad | 2009-12 |
Application of spreadsheets in developing flexible multiple‐reach and multiple‐branch methods of Muskingum flood routing | Seyed Mahmood Hosseini | 2009-12 |
Nonlinear FE Analysis of Reinforced ConcreteStructures Using a Tresca-Type Yield Surface | Mohaamad Rezaiee Pajand | 2009-12 |
Nonlinear Numerical Evaluation of Dynamic Behavior of an Asphaltic Concrete Core Rockfill Dam-A Case Study | Ali Akhtarpour | 2009-12 |
Influence of transmembrane pressure and feed concentration on the retention of arsenic, chromium and cadmium from water by nanofiltration | Shanaz Danesh | 2010-1 |
The dynamic relaxation method using new formulation for fictitious mass and damping | Mohaamad Rezaiee Pajand | 2010-1 |
Growth and Reproduction of Eisenia fetida in Vermicomposting of Organic Fraction of Municipal Solid Wastes | Shanaz Danesh | 2010-2 |
Stochastic dynamic analysis of a functionally graded thick hollow cylinder with uncertain material properties subjected to shock loading | Farzad Shahabian Moghadam | 2010-2 |
Dynamic analysis of concrete arch dams by ideal-coupled modal approach | Ahmad Aftabi Sani | 2010-5 |
Environmental Effects on Mechanical Properties of Wet Lay-Up Fiber-Reinforced Polymer | Mohammadreza Tavakkolizadeh | 2010-5 |
Development and Validation of a Two-Phase Model for Reinforced Soil by Considering Nonlinear Behavior of Matrix | Ehsan Seyedi Hosseininia | 2010-6 |
Experimental Study of Sediment Flow Discharge in New System of Bottom Intakes with Porous Media | Mahmoud Faghfour Maghrebi | 2010-6 |
A Closed-Form Non- Linear Solution For Plastic Flange Wrinkling of Circular Plates in Deep Drawing Process | Mohaamad Rezaiee Pajand | 2010-7 |
Reliability of stress field in Al–Al2O3 functionally graded thick hollow cylinder subjected to sudden unloading, considering uncertain mechanical properties | Farzad Shahabian Moghadam | 2010-7 |
An efficient procedure to find shape functions and stiffness matrices of nonprismatic Euler–Bernoulli and Timoshenko beam elements | Ahmad Shooshtari | 2010-9 |
Discharge Estimation in a Tidal River with Partially Reverse Flow | Mahmoud Faghfour Maghrebi | 2010-9 |
A mixed and multi-step higher-order implicit time integration family | Mohaamad Rezaiee Pajand | 2010-10 |
Application of Exponential-Based Methods in Integrating the Constitutive Equations with Multicomponent Nonlinear Kinematic Hardening | Mohaamad Rezaiee Pajand | 2010-12 |
NONLINEAR STRUCTURAL ANALYSIS USING DYNAMIC RELAXATION METHOD WITH IMPROVED CONVERGENCE RATE | Mohaamad Rezaiee Pajand | 2010-12 |
A new method of fictitious viscous damping determination for the dynamic relaxation method | Mohaamad Rezaiee Pajand | 2011-1 |
ACCURATE SOLUTIONS FOR GEOMETRIC NONLINEAR ANALYSIS OF EIGHT TRUSSES | Mohaamad Rezaiee Pajand | 2011-1 |
Automatic DR Structural Analysis of Snap-Through nd Snap-Back Using Optimized Load Increments | Mohaamad Rezaiee Pajand | 2011-1 |
NONLINEAR NUMERICAL INTEGRATION SCHEME IN STRAIN | Mohaamad Rezaiee Pajand | 2011-1 |
Stochastic meshless local Petrov-Galerkin (MLPG) method for thermo-elastic wave propagation analysis in functionally graded thick hollow cylinders | Farzad Shahabian Moghadam | 2011-2 |
Nonlinear dynamic structural analysis using dynamic relaxation with zero damping | Mohaamad Rezaiee Pajand | 2011-3 |
Vibration analysis of plane frames by customized stiffness and diagonal mass matrices | Mohaamad Rezaiee Pajand | 2011-3 |
Dam-reservoir-foundation interaction effects on the modal characteristic of concrete gravity dams | Hashem Shariatmadar | 2011-4 |
Investigation of hydrodynamic/biomass growth coupling in a pilot scale granular bioreactor at low pore Reynolds number | Seyed Mohsen Karrabi | 2011-4 |
Accurate and approximate integrations of DruckerePrager plasticity with linear isotropic and kinematic hardening | Mohaamad Rezaiee Pajand | 2011-5 |
An Effective Procedure for Seismic Analysis of Arch Dams including Dam-Reservoir-Foundation Interaction Effects | Ahmad Aftabi Sani | 2011-7 |
Comparing the behavior of reinforced HSC beams with AFRP bars and confined HSC beams with AFRP sheets under bending | Mansour Ghalehnovi | 2011-7 |
Coupling Numerical and Physical Modeling for Analysis of Flow in a Diversion Structure with Coanda-effect Screens | Seyed Mahmood Hosseini | 2011-7 |
Modeling and simulation of CO2 removal from power plant flue gas by PG solution in a hollow fiber membrane contactor | Shanaz Danesh | 2011-8 |
Second order sensitivity analysis for shape optimization of continuum structures | Mohaamad Rezaiee Pajand | 2011-8 |
Improving stability domains of the implicit higher order accuracy method | Mohaamad Rezaiee Pajand | 2011-9 |
Static and dynamic nonlinear analysis of semi-rigid steel frames with new beam-column element | Mohaamad Rezaiee Pajand | 2011-9 |
Static and dynamic nonlinear analysis of steel frame with semi-rigid connections | Mohaamad Rezaiee Pajand | 2011-9 |
The Effect of Dune Sands onPermanent Deformation Characteristics of Asphalt Mixtures | Yunus Niazi,Abolfazl Mohamadzadeh Moghaddam | 2011-9 |
Integration of nonlinear mixed hardening models | Mohaamad Rezaiee Pajand | 2011-10 |
Transient analysis of thermo-elastic waves in thick hollow cylinders using a stochastic hybrid numerical method, considering Gaussian mechanical properties | Farzad Shahabian Moghadam | 2011-10 |
A non-linear two-phase model for reinforced soils | Ehsan Seyedi Hosseininia | 2011-11 |
Methodology for Identifying the Best Equations for Estimating the Time of Concentration of Watersheds in a Particular Region | Seyed Mahmood Hosseini | 2011-11 |
Stochastic Assessment of Thermo-Elastic Wave Propagation in Functionally Graded Materials (FGMs) with Gaussian Uncertainty in Constitutive Mechanical Properties | Farzad Shahabian Moghadam | 2011-11 |
Uncertain spatial reasoning of environmental risks in GIS using genetic learning algorithms | Rouzbeh Shad | 2011-11 |
A novel formulation for integrating nonlinear kinematic hardening Drucker-Prager’s yield condition | Mohaamad Rezaiee Pajand | 2012-1 |
Hybrid Trefftz Formulation for Thin Plate Analysis | Mohaamad Rezaiee Pajand | 2012-1 |
Nonlinear modeling of soil deformation modulus through LGP-based interpretation of pressuremeter test results | Jafar Bolouri Bazaz | 2012-1 |
progressive collapse analysis of steel frames: simplified procedure and explicit expression for dynamic increase factor | Fereidoon Irani | 2012-1 |
Timestep Selection for Dynamic Relaxation Method | Mohaamad Rezaiee Pajand | 2012-1 |
Two efficient hybrid-Trefftz elements for plate bending analysis | Mohaamad Rezaiee Pajand | 2012-1 |
Effectiveness of fuzzy controller on damage index of nonlinear benchmark buildings | Abbas Karamodin,Fereidoon Irani | 2012-2 |
Estimating the Region of Attraction via collocation for autonomous nonlinear systems | Mohaamad Rezaiee Pajand | 2012-2 |
Interfacial Stresses in RC Beams Stregthened by Externally Bonded FRP/Steel Plates with Effects of Shear Deformations | Fereidoon Irani | 2012-2 |
Evaluation of turbulence models in the simulation of oblique standing shock waves in supercritical channel flows | Mohammad Reza Jaefarzadeh | 2012-3 |
Multi-Projects Scheduling with Resource Constraints and Priority Rules and Fuzzy Activities | Mansour Ghalehnovi | 2012-3 |
Welfare and environmental quality impacts of green taxes in Iran (a computable general equilibrium model) | Shanaz Danesh | 2012-3 |
Formulation of Secant and Reloading Soil Deformation Moduli using Multi Expression Programming | Jafar Bolouri Bazaz | 2012-4 |
Properties and Performance of Concrete Made with Recycled Low-Quality Crushed Brick | Jafar Bolouri Bazaz | 2012-4 |
Multi-Objective Resource Allocation Problem with Simulated Annealing Algorithm | Mansour Ghalehnovi | 2012-5 |
Calibration of a FE Model of Masonry wall Retrofit by CFRP-Carbon fiber reinforced polymer | Mansour Ghalehnovi | 2012-5 |
A new higher-order triangular plate bending element for the analysis of laminated composite and sandwich plates | Mohaamad Rezaiee Pajand,Farzad Shahabian Moghadam | 2012-7 |
Hydraulic performance analysis of sewer systems with uncertain parameters | Seyed Mahmood Hosseini | 2012-7 |
Investigating the micromechanical evolutions within inherently anisotropic granular materials using discrete element method | Ehsan Seyedi Hosseininia | 2012-7 |
Introducing roadside hazard severity indicator based on evidential reasoning approach | Esmaeel Ayati,Abolfazl Mohamadzadeh Moghaddam | 2012-8 |
Delamination detection in laminated composite beams using hybrid elements | Mohaamad Rezaiee Pajand,Farzad Shahabian Moghadam | 2012-9 |
stability and accuracy of non-linear dynamic analysis using time integration algorithms | Mohaamad Rezaiee Pajand | 2012-9 |
Study on Role of the Applied Load and Height of the Structure on the Performance Level of the Dual Steel Moment Frame with the Coaxial Steel Bracing | Mansour Ghalehnovi | 2012-9 |
Study on the Seismic Performance of the Buckling- Restrained Braced Frames | Mansour Ghalehnovi | 2012-9 |
Effect of Cadmium and Lead on Quantitative and EssentialOil Traits of Peppermint (Mentha piperita L | Shanaz Danesh | 2012-11 |
Supercritical flow profile improvement by means of a convex corner at a bend inlet | Mohammad Reza Jaefarzadeh | 2012-11 |
Discrete element modeling of inherently anisotropic granular assemblies with polygonal particles | Ehsan Seyedi Hosseininia | 2012-12 |
Efficiency of dynamic relaxation methods in nonlinear analysis of truss and frame structures | Mohaamad Rezaiee Pajand | 2012-12 |
Formulating an effective generalized four-sided element | Mohaamad Rezaiee Pajand | 2012-12 |
A bending element for isotropic, multilayered and piezoelectric plates | Mohaamad Rezaiee Pajand | 2013-1 |
Active Control of Structures and Reliability Analysis by Subset Simulation Method | Hashem Shariatmadar | 2013-1 |
An effective membrane element based on analytical solution | Mohaamad Rezaiee Pajand | 2013-1 |
An estimation of passive pressure against integral bridge abutments considering arching effects | Jafar Bolouri Bazaz | 2013-1 |
Determination of Stability Domains for Nonlinear Dynamical Systems Using the Weighted Residuals Method | Mohaamad Rezaiee Pajand | 2013-1 |
Effective Moment of Inertia Prediction of FRP-Reinforced Concrete Beams Based on Experimental Results | Mohammad Reza Esfahani | 2013-1 |
Pre-Cracked Concrete Shear Strengthened with External CFRP Strips | Hashem Shariatmadar | 2013-2 |
A hybrid fuzzy multi-criteria decision making approach for desalination process selection | Shanaz Danesh | 2013-3 |
Calibration of Hardening Rules for Cyclic Plasticity | Mohaamad Rezaiee Pajand | 2013-4 |
Experimental study of asphaltic concrete dynamic properties as an impervious core in embankment dams | Ali Akhtarpour | 2013-4 |
Leakage Detection in Water Distribution Network Based on a New Heuristic Genetic Algorithm Model | Mahmoud Faghfour Maghrebi | 2013-5 |
Stochastic hybrid numerical method for transient analysis of stress field in functionally graded thick hollow cylinders subjected to shock loading | Farzad Shahabian Moghadam | 2013-5 |
A closed-form solution for a fluid-structure system: shear beam-compressible fluid | Ahmad Shooshtari,Ahmad Aftabi Sani | 2013-6 |
Bond Strength of Lap-Spliced GFRP Bars in Concrete Beams | Mohammad Reza Esfahani | 2013-6 |
Identification and Prioritization of Hazardous Road Location by Segmentation and Data Envelopment Analysis Approach | Esmaeel Ayati | 2013-6 |
Investigating the effect of bond slip on the seismic response of RC structures | Ahmad Shooshtari | 2013-6 |
Two-dimensional elastic wave propagation analysis in finite length FG thick hollow cylinders with 2D nonlinear grading patterns using MLPG method | Farzad Shahabian Moghadam | 2013-6 |
A STUDY OF THE CONCEPT OF DYNAMIC EQUIPMENT IN THE EARTHMOVING PROCESS BY A CONSIDERATION OF TIME, COST AND EMISSIONS | Mojtaba Maghrebi | 2013-7 |
Four New Methods for Finding Structural Critical Points | Mohaamad Rezaiee Pajand | 2013-7 |
Integrating the Pressure-Sensitive Nonassociative Plasticity by Exponential-Based Methods | Mohaamad Rezaiee Pajand | 2013-7 |
A free of parasitic shear strain formulation for plane element | Mohaamad Rezaiee Pajand | 2013-8 |
Nonlinear analysis of cable structures under general loadings | Ahmad Shooshtari | 2013-10 |
Probabilistic Nonlinear Dynamic Analysis of Plane frame With Material and Geometric Uncertainties | Farzad Shahabian Moghadam | 2013-10 |
Stress–force–fabric relationship for planar granular materials | Ehsan Seyedi Hosseininia | 2013-10 |
A Multimode Adaptive Pushover Procedure for Seismic Assessment of Integral Bridges | Ahmad Shooshtari | 2013-11 |
Elastic wave propagation in a functionally graded nanocomposite reinforced by carbon nanotubes employing meshless local integral equations (LIEs) | Farzad Shahabian Moghadam | 2013-11 |
Pressure-Driven Demand and Leakage Simulation for Pipe Networks Using Differential Evolution | Mohammad Reza Jaefarzadeh | 2013-11 |
Comprehensive evaluation of structural geometrical nonlinear solution techniques Part I: Formulation and characteristics of the methods | Mohaamad Rezaiee Pajand | 2013-12 |
Comprehensive evaluation of structural geometrical nonlinear solution techniques Part II: Comparing efficiencies of the methods | Mohaamad Rezaiee Pajand | 2013-12 |
Forced Vibration Analysis of a Dam-Reservoir Interaction Problem in Frequency Domain | Ahmad Shooshtari,Ahmad Aftabi Sani | 2013-12 |
INTEGRATED BUILDING INFORMATION MODELLING (BIM) WITH SUPPLY CHAIN AND FEED-FORWARD CONTROL | Mojtaba Maghrebi | 2013-12 |
Safety Analysis of the Patch Load Resistance of Plate Girders: Influence of Model Error and Variability | Farzad Shahabian Moghadam | 2013-12 |
Two new hybrid methods in integrating constitutive equations | Mohaamad Rezaiee Pajand | 2013-12 |
A modification to dense sand dynamic simulation capability of Pastor–Zienkiewicz–Chan model | Ehsan Seyedi Hosseininia | 2014-1 |
An evolutionary computational approach for formulation of compression index of fine-grained soils | Jafar Bolouri Bazaz | 2014-1 |
Crack detection in concrete gravity dams by using new cracked element and genetic algorithm | Mohaamad Rezaiee Pajand | 2014-1 |
Damage detection by updating structural models based on linear objective functions | Hashem Shariatmadar,Mansour Ghalehnovi | 2014-1 |
Delamination detection in buckling laminated composite plates | Mohaamad Rezaiee Pajand,Farzad Shahabian Moghadam | 2014-1 |
Hydraulic Analysis of Water Distribution Network Using Shuffled Complex Evolution | Mohammad Reza Jaefarzadeh | 2014-1 |
Optimal Node Location in Triangular Plate Bending Elements | Mohaamad Rezaiee Pajand | 2014-1 |
Prediction of ultimate axial load-carrying capacity of piles using a support vector machine based on CPT data | Fereydoon Pooya Nejad | 2014-1 |
Static Damage Identification of 3D and 2D Frames | Mohaamad Rezaiee Pajand,Ahmad Aftabi Sani | 2014-1 |
Stochastic analysis of elastic wave and second sound propagation in media with Gaussian uncertainty in mechanical properties using a stochastic hybrid mesh-free method | Farzad Shahabian Moghadam | 2014-1 |
An Investigation of Seismic Response of Precast Concrete Beam to Column Connections: Experimental Study | Hashem Shariatmadar | 2014-2 |
Introducing a risk estimation index for drivers: A case of Iran | Abolfazl Mohamadzadeh Moghaddam,Esmaeel Ayati | 2014-2 |
New Approaches to Bond Between Bamboo and Concrete | Hassan Haji Kazemi | 2014-2 |
Stability boundaries of two-parameter non-linear elastic structures | Mohaamad Rezaiee Pajand | 2014-2 |
A Study of the Seismic Response of Asphaltic Concrete Used as a Core in Rockfill Dams | Ali Akhtarpour | 2014-3 |
Damage detection in structural systems by improved sensitivity of modal strain energy and Tikhonov regularization method | Hashem Shariatmadar | 2014-3 |
Possibility of Pedestrian Countdown Signals Usage at Tehran Signalized Intersections | Seyed Ali Ziaee | 2014-3 |
Two dimensional stress wave propagation in finite length FG cylinders with two directional nonlinear grading patterns using MLPG method | Farzad Shahabian Moghadam | 2014-3 |
Two higher order hybrid-Trefftz elements for thin plate bending analysis | Mohaamad Rezaiee Pajand | 2014-4 |
constantly moving transportation:do present traffic safety measures protect-vehicle drivers | Seyed Ali Ziaee | 2014-5 |
Damage localization in shear buildings by direct updating of physical properties | Hashem Shariatmadar | 2014-5 |
Determining the amount and location of leakage in water supply systems using a neural network improved bat optimization algorithm | Mahmoud Faghfour Maghrebi | 2014-5 |
Experimentally analyzing compressive and tensile strengths of concrete containing steel waste fibers | Mansour Ghalehnovi | 2014-5 |
Flexural ductility of reinforced concrete beams with lap-spliced bars | Mohammad Reza Esfahani,Bratali Mohammadzadeh | 2014-5 |
An efficient formulation for linear and geometric non- linear membrane elements | Mohaamad Rezaiee Pajand | 2014-6 |
Assessing the Accuracy of Expert-Based Decisions in Dispatching Ready Mixed Concrete | Mojtaba Maghrebi | 2014-6 |
Efficiency of Neural Networks for Estimating the Patch Load Resistance of Plate Girders with a Focus on Uncertainties in Material and Geometrical Properties | Farzad Shahabian Moghadam | 2014-6 |
Predicting the Duration of Concrete Operations Via Artificial Neural Network and by Focusing on Supply Chain Parameters | Mojtaba Maghrebi | 2014-6 |
Vibration Control of Buildings Using ATMD Against Earthquake Excitations Through Interval Type-2 Fuzzy Logic Controller | Hashem Shariatmadar | 2014-6 |
Crack Propagation Analysis in Concrete Gravity Dams Using Fracture Mechanics Concepts | Mohammad Reza Esfahani | 2014-7 |
Effect of multi-walled carbon nanotubes on mechanical properties of high-performance mortar | Hassan Haji Kazemi | 2014-7 |
Effect of stiffness modulus and dynamic loading on pavement subgrade | Ali Sahaf | 2014-7 |
Feasibility of solar thermal collectors usage in dwelling apartments in Mashhad, the second megacity of Iran | Mohammad SHokouhian | 2014-7 |
Structural geometrical nonlinear analysis by displacement increment | Mohaamad Rezaiee Pajand | 2014-7 |
Analysis of Cracked Truss Type Structures | Ahmad Shooshtari | 2014-8 |
Damage identification of 2D and 3D trusses by using complete and incomplete noisy measurements | Mohaamad Rezaiee Pajand | 2014-8 |
Hybrid Stress and Analytical Functions for Analysis of Thin Plates Bending | Mohaamad Rezaiee Pajand | 2014-8 |
Seismic control response of structures using an ATMD with fuzzy logic controller and PSO method | Hashem Shariatmadar | 2014-8 |
Angles based integration for generalized non-linear plasticity model | Mohaamad Rezaiee Pajand | 2014-9 |
Effects of waste fibers stabilizers on the draindown and moisture damage sensitivity properties of SMA mixtures | Abolfazl Mohamadzadeh Moghaddam,Seyed Ali Ziaee | 2014-9 |
Hydraulic Analysis of Water Supply Networks Using a Modified Hardy Cross Method | Mohammad Reza Jaefarzadeh | 2014-9 |
Fictitious Time Step for the Kinetic Dynamic Relaxation Method | Mohaamad Rezaiee Pajand | 2014-10 |
Road safety performance evaluation and policy making by data envelopment analysis: A case study of provincial data in Iran | Esmaeel Ayati | 2014-10 |
A robust triangular membrane element | Mohaamad Rezaiee Pajand | 2014-11 |
More accurate and stable time integration scheme | Mohaamad Rezaiee Pajand | 2014-11 |
Two new quadrilateral elements based on strain states | Mohaamad Rezaiee Pajand | 2014-11 |
Computational plasticity of mixed hardening pressure-dependency constitutive equations | Mohaamad Rezaiee Pajand | 2014-12 |
Dynamic Analysis of a Layered Cylinder Reinforced by Functionally Graded Carbon Nanotubes Distributions Subjected to Shock Loading using MLPG Method | Farzad Shahabian Moghadam | 2014-12 |
Effects of Different Water and Super Plasticizer Amount, Pre-Setting and Curing Regimes on the Behavior of Reactive Powder Concrete | Hassan Haji Kazemi,Farzad Shahabian Moghadam | 2014-12 |
Greens function for uniform Euler Bernoulli beams at resonant condition Introduction of Fredholm Alternative Theorem | Ahmad Aftabi Sani | 2014-12 |
A Comparison of ANN and HSPF Models for Runoff Simulation in Balkhichai River Watershed, Iran | Mohammad Bagher Sharifi | 2015-1 |
A Novel Hexahedral Interface Element for Nonlinear Crack Analysis | Mohaamad Rezaiee Pajand | 2015-1 |
Geometrically nonlinear elastodynamic analysis of hyper-elastic neo-Hooken FG cylinder subjected to shock loading using MLPG method | Farzad Shahabian Moghadam | 2015-1 |
Stress Analysis of Free-Edge Laminated Composite Plates by Two Bending Elements | Mohaamad Rezaiee Pajand,Farzad Shahabian Moghadam | 2015-1 |
THREE SCHEMES FOR ACTIVE CONTROL OF THE PLANAR FRAME | Mohaamad Rezaiee Pajand | 2015-1 |
Using Lagrangian Relaxation to Solve Ready Mixed Concrete Dispatching Problems | Mojtaba Maghrebi | 2015-1 |
A comparative numerical study of a geosynthetic-reinforced soil wall using three different constitutive soil models | Ehsan Seyedi Hosseininia | 2015-2 |
A new two-dimensional cracked finite element for fracture mechanics | Ahmad Shooshtari | 2015-2 |
Numerical Analysis of Seepage of Concrete-Coated Water Transmission Channels Considering Saturated-Unsaturated Conditions | Saeed Abrishami | 2015-2 |
Stability of non-prismatic frames with flexible connections and elastic supports | Mohaamad Rezaiee Pajand,Farzad Shahabian Moghadam | 2015-2 |
STABILITY OF SEMI-RIGID PORTAL FRAMES WITH TAPERED COLUMNS AND LATERAL SUPPORT | Mohaamad Rezaiee Pajand,Farzad Shahabian Moghadam | 2015-2 |
Vibration of Beam with Elastically Restrained Ends and Rotational Spring-Lumped Rotary Inertia System at Mid-Span | Ahmad Aftabi Sani | 2015-2 |
Analysis of 3D Timoshenko frames having geometrical and material nonlinearities | Mohaamad Rezaiee Pajand | 2015-3 |
Deformation of Euler-Bernoulli Beams by means of Modified Green's Function: Application of Fredholm Alternative Theorem | Ahmad Aftabi Sani | 2015-3 |
A meshless local Petrov–Galerkin method for nonlinear dynamic analyses of hyper-elastic FG thick hollow cylinder with Rayleigh damping | Farzad Shahabian Moghadam | 2015-4 |
Elastic settlement of ring foundations | Ehsan Seyedi Hosseininia | 2015-4 |
Evaluation of short piles bearing capacity subjected to lateral loading in sandy soil | Jafar Bolouri Bazaz | 2015-4 |
Explicit formulation of bearing capacity of shallow foundations on rock masses using artificial neural networks: application and supplementary studies | Seyed Ali Ziaee | 2015-4 |
Exponential-based integration for Bigonie-Piccolroaz plasticity model | Mohaamad Rezaiee Pajand | 2015-4 |
Laboratory E valuation of CMA impact on the S lipping resistance of the roads surface | Ali Sahaf | 2015-4 |
Improving the performance of water balance equation using fuzzy logic approach | Seyed Mahmood Hosseini | 2015-5 |
New Sensitivity-based Methods for Structural damage Diagnosis by Least Square Minimal Residual Techniques | Hashem Shariatmadar | 2015-5 |
Optimum Parameters for Tuned Mass Damper Using Shuffled Complex Evolution (SCE) Algorithm | Hashem Shariatmadar | 2015-5 |
A micromechanical study on the stress rotation in granular materials due to fabric evolution | Ehsan Seyedi Hosseininia | 2015-6 |
A Numerical Method to Material and Geometric Nonlinear Analysis of Cable Structures | Ahmad Shooshtari | 2015-6 |
Optimality gap of experts' decisions in concrete delivery dispatching | Mojtaba Maghrebi | 2015-6 |
Particle Swarm Optimization for Hydraulic Analysis of Water Distribution Systems | Mohammad Reza Jaefarzadeh | 2015-6 |
Pushover analysis of gabled frames with semi-rigid connections | Ahmad Shooshtari | 2015-6 |
Buckling analysis of semi-rigid gabled frames | Mohaamad Rezaiee Pajand,Farzad Shahabian Moghadam | 2015-7 |
Using residual areas for geometrically nonlinear structural analysis | Mohaamad Rezaiee Pajand | 2015-7 |
Feasibility study of automatically performing the concrete delivery dispatching through machine learning techniques | Mojtaba Maghrebi | 2015-9 |
Application of Greens Functions for Constructing Influence Lines | Ahmad Aftabi Sani | 2015-10 |
Seismic analysis of the soil–structure interaction for a high rise building adjacent to deep excavation | Jafar Bolouri Bazaz,Ali Akhtarpour | 2015-11 |
Characterization and Molecular Identification of Extracellular Polymeric Substance (EPS) Producing Bacteria from Activated Sludge | Seyed Mohsen Karrabi | 2015-12 |
Dynamic Analysis of Cylindrically Layered Structures Reinforced by Carbon Nanotube Using MLPG Method | Farzad Shahabian Moghadam | 2015-12 |
Evaluation of Long Term Ageing of Asphalt Mixtures Containing EAF and BOF Steel Slags | Seyed Ali Ziaee,Abolfazl Mohamadzadeh Moghaddam | 2015-12 |
Large Deformation Hyper-Elastic Modeling for Nonlinear Dynamic Analysis of Two Dimensional Functionally Graded Domains Using the Meshless Local Petrov-Galerkin (MLPG) Method | Farzad Shahabian Moghadam | 2015-12 |
Nonlinear control of structure using neuro-predictive algorithm | Abbas Karamodin,Hassan Haji Kazemi | 2015-12 |
Significance of Soil Compaction on Blast Resistant Behavior of Underground Structures: A Parametric Study | Ehsan Seyedi Hosseininia | 2015-12 |
Verification of an Evolutionary-based Wavelet Neural Network Model for Nonlinear Function Approximation | Hassan Haji Kazemi,Abbas Karamodin | 2015-12 |
A closed-form study on the free vibration of a grid joined by a mass-spring system | Ahmad Aftabi Sani | 2016-1 |
A New Explicit Time Integration Scheme for Nonlinear Dynamic Analysis | Mohaamad Rezaiee Pajand | 2016-1 |
A quadrilateral plate bending element based on deformation modes | Mohaamad Rezaiee Pajand | 2016-1 |
Deriving an intelligent model for soil compression index utilizing multi-gene genetic programming | Jafar Bolouri Bazaz | 2016-1 |
Effectiveness of sliding isolators with variable curvature in near‐fault ground motions | Abbas Karamodin | 2016-1 |
Free vibration analysis of a double-beam system joined by a mass-spring device | Mohaamad Rezaiee Pajand | 2016-1 |
Hybrid-Trefftz formulation for analysis of thick orthotropic plates | Mohaamad Rezaiee Pajand | 2016-1 |
In situ rheological characterisation of wastewater sludge: Comparison of stirred bioreactor and pipe flow configurations | Seyed Mohsen Karrabi | 2016-1 |
Localized genetically optimized wavelet neural network for semiactive control of buildings subjected to earthquake | Hassan Haji Kazemi,Abbas Karamodin | 2016-1 |
Sequential Meta-Heuristic Approach for Solving Large-Scale Ready-Mixed Concrete–Dispatching Problems | Mojtaba Maghrebi | 2016-1 |
Time Integration Method Based on Discrete Transfer Function | Mohaamad Rezaiee Pajand | 2016-1 |
Using More Accurate Strain For Three-Dimensional Truss Analysis | Mohaamad Rezaiee Pajand | 2016-1 |
Behavior of Damaged Exterior RC Beam-Column Joints Strengthened by CFRP Composites | Hashem Shariatmadar | 2016-2 |
Column Generation‐Based Approach for Solving Large‐Scale Ready Mixed Concrete Delivery Dispatching Problems | Mojtaba Maghrebi | 2016-2 |
Computing the structural buckling limit load by using dynamic relaxation method | Mohaamad Rezaiee Pajand | 2016-2 |
Experimental Investigation of Damaged Exterior RC Beam–Column Joints Retrofittrd by FRP Jacketing Kind | Hashem Shariatmadar | 2016-2 |
Relationship of Tensile Strength of Steel fiber reinforced Concrete Based on Genetic Programming | Mohammad Reza Esfahani | 2016-2 |
Application of Risk-BasedMultipleCriteria Decision Analysis for Selection of the Best AgriculturalScenario forEffective Watershed Management | Mohammad Bagher Sharifi | 2016-3 |
Evaluation of the Mechanical Properties of the Cement Treated Cold in Place Recycled Asphalt | Jafar Bolouri Bazaz | 2016-3 |
Free vibration analysis of a beam with an intermediate sliding connection joined by a mass-spring system | Ahmad Aftabi Sani | 2016-3 |
Investigation of Temperature Dynamics in Small and Shallow Reservoirs, Case Study: Lake Binaba, Upper East Region of Ghana | Ali Abbasi | 2016-3 |
Strengthening and rehabilitation of exterior RC beam–column joints using carbon-FRP jacketing | Hashem Shariatmadar | 2016-3 |
An Explicit Stiffness Matrix for Parabolic Beam Element | Mohaamad Rezaiee Pajand | 2016-4 |
Examining the Impact of Micro Silica Gel Additive on the Compressive Strength and Water Absorption of Roller Compacted Concrete Pavement | Ali Sahaf | 2016-4 |
Fusion based learning approach for predicting concrete pouring productivity based on construction and supply parameters | Mojtaba Maghrebi | 2016-4 |
Matching experts' decisions in concrete delivery dispatching centers by ensemble learning algorithms: Tactical level | Mojtaba Maghrebi | 2016-4 |
Screening out accident-prone Iranian drivers: are their at-fault accidents related to driving behavior | Abolfazl Mohamadzadeh Moghaddam,Esmaeel Ayati | 2016-4 |
Analytical and numerical method for free vibration of double-axially functionally graded beams | Mohaamad Rezaiee Pajand | 2016-5 |
Analytical solution for free vibration of flexible 2D rectangular tanks | Mohaamad Rezaiee Pajand | 2016-5 |
Bearing Capacity Factors of Ring Footings | Ehsan Seyedi Hosseininia | 2016-5 |
A curved triangular element for nonlinear analysis of laminated shells | Mohaamad Rezaiee Pajand | 2016-6 |
Application of nodal pressure measurements in leak detection | Mahmoud Faghfour Maghrebi | 2016-6 |
Application of response surface methodology and artificial neural network for analysis of p-chlorophenol biosorption by dried activated sludge | Seyed Mohsen Karrabi | 2016-6 |
Geometrical Nonlinear Analysis of Plane Problems by Corotational Formulation | Mohaamad Rezaiee Pajand | 2016-6 |
Mixing dynamic relaxation method with load factor and displacement increments | Mohaamad Rezaiee Pajand | 2016-6 |
A new iterative model updating technique based on least squares minimal residual method using incomplete modal data | Abbas Karamodin | 2016-7 |
Free vibration analysis of horizontal cylindrical shells including sloshing effect utilizing polar finite elements | Ahmad Aftabi Sani | 2016-7 |
Introducing new cracked finite elements and a method for SIF calculation of cracks | Ahmad Shooshtari | 2016-7 |
Post-cracking behavior of UHPC on the concrete members reinforced by steel rebar | Mansour Ghalehnovi | 2016-7 |
Review of Waste Water Reuse with using a Combination Adsorption-Gel Resin Filtration as a Hybrid Process | Shanaz Danesh | 2016-7 |
Hazard-based model for concrete pouring duration using construction site and supply chain parameters | Mojtaba Maghrebi | 2016-8 |
Prediction of Pavement Performance application of support v ector regression with different Kernel | Mojtaba Maghrebi | 2016-8 |
A comparative study between dried anaerobic digested sludge and dried activated sludge for the removal of 4-chlorophenol from aqueous solutions | Seyed Mohsen Karrabi | 2016-9 |
Spatial variability analysis of subsurface soil in the city of Mashhad, northern-east Iran | Jafar Bolouri Bazaz | 2016-9 |
Analysis of cracked skeletal structures by utilizing a cracked beam-column element | Ahmad Shooshtari | 2016-10 |
Investigation of water level profile and stage-discharge curve in labyrinth Weirs | Mahmoud Faghfour Maghrebi | 2016-10 |
New method for estimation of stage-discharge curves in natural rivers | Mahmoud Faghfour Maghrebi | 2016-10 |
A Comparison of Large Deflection Analysis of Bending Plates by Dynamic Relaxation | Mohaamad Rezaiee Pajand | 2016-11 |
Improving the Interaction of Chord and Neck (fingerboard) in String Instruments | Hassan Haji Kazemi | 2016-11 |
Investigation of nonlinear dynamic behavior of lattice structure wind turbines | Ahmad Shooshtari | 2016-11 |
Static and dynamic analysis of circular beams using explicit stiffness matrix | Mohaamad Rezaiee Pajand | 2016-11 |
Uncertainty-based prioritization of road safety projects: An application of data envelopment analysis | Abolfazl Mohamadzadeh Moghaddam | 2016-11 |
A mathematical model for the municipal solid waste location-routing problem with intermediate transfer stations | Mojtaba Maghrebi | 2016-12 |
Finding equilibrium paths by minimizing external work in dynamic relaxation method | Mohaamad Rezaiee Pajand | 2016-12 |
Optimization Formulation For Nonlinear Structural Analysis | Mohaamad Rezaiee Pajand | 2016-12 |
Stage-discharge prediction in natural rivers using an innovative approach | Mahmoud Faghfour Maghrebi | 2016-12 |
The eect of fuzzy controller on damage of steel structure considering structural uncertainties | Abbas Karamodin,Hassan Haji Kazemi | 2016-12 |
Analyzing Free-Free Beams by Green's Functions and Fredholm Alternative Theorem | Mohaamad Rezaiee Pajand,Ahmad Aftabi Sani | 2017-1 |
Application of Differential Transform Method to Free Vibration of Gabled Frames with Rotational Springs | Mohaamad Rezaiee Pajand | 2017-1 |
Application of the strut-and-tie method for steel fiber reinforced concrete deep beams | Mohammad Reza Esfahani | 2017-1 |
Biosorption of 4-chlorophenol by dried anaerobic digested sludge: artificial neural network modeling, equilibrium isotherm, and kinetic study | Seyed Mohsen Karrabi | 2017-1 |
Developing an Iranian green building assessment tool using decision making methods and geographical information system: Case study in Mashhad city | Rouzbeh Shad | 2017-1 |
Durability performance of structural concrete containing silica fume and marble industry waste powder | Mansour Ghalehnovi | 2017-1 |
Free Vibration Analysis of a Six-degree-of-freedom Mass-spring System Suitable for Dynamic Vibration Absorbing of Space Frames | Ahmad Aftabi Sani,Mohaamad Rezaiee Pajand | 2017-1 |
Geometrical nonlinear analysis by plane quadrilateral element | Mohaamad Rezaiee Pajand | 2017-1 |
Geometrically nonlinear analysis of shells by various dynamic relaxation methods | Mohaamad Rezaiee Pajand | 2017-1 |
Isogeometric analysis of functionally graded plates using a new quasi-3D shear deformation theory based on physical neutral surface | Abbas Karamodin | 2017-1 |
Nonlinear Frame Analysis BY Minimization Techniques | Mohaamad Rezaiee Pajand | 2017-1 |
Seismic Design and Performance of Dual and Eccentrically Braced framed systems using PBPD | Abbas Karamodin | 2017-1 |
Exploring the capacity of social media data for modelling travel behaviour: Opportunities and challenges | Mojtaba Maghrebi | 2017-2 |
Predicting saltwater intrusion into aquifers in vicinity of deserts using spatio-temporal kriging | Seyed Mahmood Hosseini | 2017-2 |
Push-out test on the one end welded corrugated-strip connectors in steel-concrete-steel sandwich structure | Mansour Ghalehnovi | 2017-2 |
Improving Signal Subspace Identification Using Weighted Graph Structure of Data | Rouzbeh Shad | 2017-3 |
Modified differential transformation method for solving nonlinear dynamic problems | Mohaamad Rezaiee Pajand | 2017-3 |
Adaptation of simulated annealing to an integrated municipal solid waste location-routing problem | Mojtaba Maghrebi | 2017-4 |
EQUIVALENT PIPE NETWORK MODEL FOR A COARSE POROUS MEDIA AND ITS APPLICATION TO 2D ANALYSIS OF FLOW THROUGH ROCKFILL STRUCTURES | Seyed Mahmood Hosseini,Ahmad Aftabi Sani | 2017-4 |
Free Vibration of a Generalized Plane Frame | Mohaamad Rezaiee Pajand,Ahmad Aftabi Sani | 2017-4 |
New ways to symmetrise free vibration equations of fluid–structure interaction systems | Ahmad Aftabi Sani | 2017-4 |
Comparison between Two Different Pluviation Setups of Sand Specimens | Saeed Abrishami,Ehsan Seyedi Hosseininia | 2017-5 |
Efficient multi-step differential transform method Theory and its application to nonlinear oscillators | Ahmad Aftabi Sani | 2017-5 |
The Effect of Openings on Buckling Resistance of Cylindrical Shells Made of Functionally Graded Materials | Farzad Shahabian Moghadam | 2017-5 |
An iterative order determination method for time-series modeling in structural health monitoring | Mohaamad Rezaiee Pajand,Hashem Shariatmadar | 2017-6 |
Effects of atmospheric stability conditions on heat fluxes from small water surfaces in (semi-)arid regions | Ali Abbasi | 2017-6 |
Frame nonlinear analysis by force method | Mohaamad Rezaiee Pajand | 2017-6 |
Geometry of interest (GOI): spatio-temporal destination extraction and partitioning in GPS trajectory data | Mojtaba Maghrebi | 2017-6 |
A novel approach to find and optimize bin locations and collection routes using a geographic information system | Shanaz Danesh,Seyed Mohsen Karrabi,Rouzbeh Shad | 2017-7 |
Analysis of Welding Residual Stresses in Box Columns | Farzad Shahabian Moghadam | 2017-7 |
Structural damage detection by a new iterative regularization method and an improved sensitivity function | Hashem Shariatmadar | 2017-7 |
A simple iterative method for water distribution network analysis | Seyed Mahmood Hosseini,Ahmad Aftabi Sani | 2017-8 |
Bearing capacity of ring footings on cohesionless soil under eccentric load | Ehsan Seyedi Hosseininia | 2017-8 |
Experimental and analytical study of steel slit shear wall | Hashem Shariatmadar | 2017-8 |
IDENTIFICATION OF ROAD CRASH BLACK-SITES USING GEOGRAPHICAL INFORMATION SYSTEM | Rouzbeh Shad | 2017-8 |
Risk assessment of failure of rock bolts in underground coal mines using support vector machines', Applied Stochastic Models in Business and Industry | Mojtaba Maghrebi | 2017-8 |
An accurate predictor-corrector time integration method for structural dynamics | Mohaamad Rezaiee Pajand | 2017-9 |
Bearing Capacity Factors of Ring Footings by Using the Method of Characteristics | Ehsan Seyedi Hosseininia | 2017-9 |
Controlling structures by inverse adaptive neuro fuzzy inference system and MR dampers | Mohaamad Rezaiee Pajand | 2017-9 |
The state of the art in Dynamic Relaxation methods for structural mechanics Part 1 Formulations | Mohaamad Rezaiee Pajand | 2017-9 |
A framework to simulate small shallow inland water bodies in semi-arid regions | Ali Abbasi | 2017-10 |
A fuzzy decision-support system in road safety planning | Esmaeel Ayati | 2017-10 |
An Efficient Flat Shell Element | Mohaamad Rezaiee Pajand,Mohaamad Rezaiee Pajand | 2017-10 |
RECONSTITUTION OF SAND SPECIMENS USING A RAINER SYSTEM | Jafar Bolouri Bazaz | 2017-10 |
Stage-discharge estimation in straight compound channels using isovel contours | Mahmoud Faghfour Maghrebi | 2017-10 |
The state of the art in Dynamic Relaxation methods for structural mechanics Part 2: Applications | Mohaamad Rezaiee Pajand | 2017-10 |
A Hybrid Stress Plane Element with Strain Field | Mohaamad Rezaiee Pajand | 2017-12 |
A more realistic approach towards concrete delivery dispatching problem: using real distance instead spatial distance | Mojtaba Maghrebi | 2017-12 |
A novel time integration formulation for nonlinear dynamic analysis | Mohaamad Rezaiee Pajand | 2017-12 |
DYNAMIC RESPONSE ANALYSIS OF A COMBINED SYSTEM OF FRAMED TUBED, SHEAR CORE AND OUTRIGGER-BELT TRUSS | Hassan Haji Kazemi | 2017-12 |
Shock-induced stochastic dynamic analysis of cylinders made of saturated porous materials using MLPG method: considering uncertainty in mechanical properties | Farzad Shahabian Moghadam | 2017-12 |
Two Dimensional Stress and Displacement Wave Propagation Under Shock Loading in Saturated Porous Materials with Two Dimensional Functionally Graded Materails Using MLPG Method | Farzad Shahabian Moghadam | 2017-12 |
A new and simple analytical approach to determining the natural frequencies of framed tube structures | Hassan Haji Kazemi | 2018-1 |
A triangular shell element for geometrically nonlinear analysis | Mohaamad Rezaiee Pajand | 2018-1 |
Comparative analysis of three-dimensional frames by dynamic relaxation methods | Mohaamad Rezaiee Pajand | 2018-1 |
DAMAGE AND PLASTICITY CONSTANTS OF CONVENTIONAL AND HIGH-STRENGTH CONCRETE PART I: STATISTICAL OPTIMIZATION USING GENETIC ALGORITHM | Mohammad Reza Esfahani | 2018-1 |
Establishment and experimental validation of an updated predictive equation for the development and lap-spliced length of GFRP bars in concrete | Mohammad Reza Esfahani | 2018-1 |
Free vibration analysis of concrete arch dams by quadratic ideal-coupled method | Mohaamad Rezaiee Pajand,Ahmad Aftabi Sani | 2018-1 |
Free Vibration Analysis of Rotating Euler–Bernoulli Beam with Exponentially Varying Cross-Section by Differential Transform Method | Ahmad Aftabi Sani | 2018-1 |
Free Vibration of MDOF Systems with Nonperiodically Time-Varying Mass | Ahmad Aftabi Sani | 2018-1 |
Geometrical nonlinear analysis based on optimization technique | Mohaamad Rezaiee Pajand | 2018-1 |
Investigation of Soil–Structure Interaction Effects on Seismic Response of a 5 MW Wind Turbine | Ahmad Shooshtari | 2018-1 |
Investigation of spatial variability of SPT data in Mashhad City (NE Iran) using a geostatistical approach | Jafar Bolouri Bazaz | 2018-1 |
Nonlocal static analysis of a functionally graded material curved nanobeam | Mohaamad Rezaiee Pajand | 2018-1 |
Numerical analysis of seismic stability of a high centerline tailings dam | Ali Akhtarpour | 2018-1 |
PREDICTION OF BIAXIAL BENDING BEHAVIOR OF STEEL-CONCRETE COMPOSITE BEAM-COLUMNS BY ARTIFICIAL NEURAL NETWORK | Mohammad Reza Esfahani | 2018-1 |
The effects of small water surfaces on turbulent flow in the atmospheric boundary layer: URANS approach implemented in OpenFOAM | Ali Abbasi | 2018-1 |
Two new triangular finite elements containing stable open cracks | Mohaamad Rezaiee Pajand | 2018-1 |
Using co-rotational method for cracked frame analysis | Mohaamad Rezaiee Pajand | 2018-1 |
A curtain traveling pluviator to reconstitute large scale sand specimens | Jafar Bolouri Bazaz | 2018-2 |
An experimental investigation on stable arch formation in cohesionless granular materials using developed trapdoor test | Ehsan Seyedi Hosseininia | 2018-2 |
Damage and plasticity constants of conventional and high-strength concrete part II: STATISTICAL EQUATION DEVELOPMENT USING GENETIC PROGRAMMING | Mohammad Reza Esfahani | 2018-2 |
Effect of cationic asphalt emulsion as an admixture on transport properties of roller-compacted concrete | Abolfazl Mohamadzadeh Moghaddam | 2018-2 |
Effects of tensile steel bars arrangement on concrete cover separation of RC beams strengthened by CFRP sheets | Mohammad Reza Esfahani | 2018-2 |
Enhancing the quality of geometries of interest (GOIs) extracted from GPS trajectory data using spatio-temporal data aggregation and outlier detection | Mojtaba Maghrebi | 2018-2 |
Seismic control of buildings with active tuned mass damper through interval type-2 fuzzy logic controller including soil–structure interaction | Hashem Shariatmadar | 2018-2 |
Static analysis of functionally graded non-prismatic sandwich beams | Mohaamad Rezaiee Pajand | 2018-2 |
An incremental iterative solution procedure without predictor step | Mohaamad Rezaiee Pajand | 2018-3 |
An unsupervised learning approach by novel damage indices in structural health monitoring for damage localization and quantification | Hashem Shariatmadar | 2018-3 |
Analysis and Evaluation of Traffic Congestion Control Methods in Touristic Metropolis Using Analytical Hierarchy Process (AHP) | Rouzbeh Shad | 2018-3 |
Bearing Stiffness of UHPC; An Experimental Investigation and A Comparative Study of Regression and SVR-ABC Models | Mansour Ghalehnovi | 2018-3 |
Mechanical, environmental and economic performance of structural concrete containing silica fume and marble industry waste powder | Mansour Ghalehnovi | 2018-3 |
The stiffness matrix of cracked finite elements: Introducing shortcomings in applying stiffness approach and proposing a solution | Ahmad Shooshtari | 2018-3 |
Vibration suppression of a double-beam system by a two beam system by a two-degree-of-freedom mass-spring system | Mohaamad Rezaiee Pajand,Ahmad Aftabi Sani | 2018-3 |
بررسی آزمایشگاهی اتصالات خارجی تیربه ستون بتنی با میلگردهای پلیمری مسلح الیافی و فولادی تحت تاثیربارهای چرخه ای | Hashem Shariatmadar,Mohammad Reza Esfahani | 2018-3 |
Finite element model for interlayer behavior of double skin steel-concrete-steel sandwich structure with corrugated-strip shear connectors | Mansour Ghalehnovi | 2018-4 |
Mathematical model to optimally solve the lift planning problem in high-rise construction projects | Mojtaba Maghrebi,Jafar Bolouri Bazaz | 2018-4 |
Numerical simulation of two-tier geosynthetic-reinforced-soil walls using two-phase approach | Ehsan Seyedi Hosseininia | 2018-4 |
Three-dimensional deformations of a curved circular beam subjected to thermo-mechanical loading using green’s function method | Mohaamad Rezaiee Pajand | 2018-4 |
Analysis of Citation Networks in Building Information Modeling Research | Mojtaba Maghrebi | 2018-5 |
Exact natural frequencies and buckling load of functionally graded material tapered beam-columns considering semi-rigid connections | Mohaamad Rezaiee Pajand | 2018-5 |
Force-based curved beam elements with open radial edge cracks | Mohaamad Rezaiee Pajand | 2018-5 |
Iterative adaptive Despeckling SAR image using anisotropic diffusion filter and Bayesian estimation denoising in wavelet domain | Rouzbeh Shad | 2018-5 |
Mathematical modelling and heuristic approaches to the location-routing problem of a cost-effective integrated solid waste management | Mojtaba Maghrebi | 2018-5 |
Stability and free vibration analysis of tapered sandwich columns with functionally graded core and flexible connections | Mohaamad Rezaiee Pajand | 2018-5 |
The Deformation Mechanism of a High Rockfill Dam during the Construction and First Impounding | Ali Akhtarpour | 2018-5 |
Application of Green’s function method to bending of stress gradient nanobeams | Mohaamad Rezaiee Pajand,Ahmad Aftabi Sani | 2018-6 |
Evaluation of Hybrid Fiber Reinforced Concrete Exposed to Severe Environmental Conditions | Mohammad Reza Esfahani | 2018-6 |
Finite Element Analysis of Orthotropic Thin Plates Using Analytical Solution | Mohaamad Rezaiee Pajand,Mohaamad Rezaiee Pajand | 2018-6 |
Geometrically nonlinear analysis of FG doubly-curved and hyperbolical shells via laminated by new element | Mohaamad Rezaiee Pajand | 2018-6 |
Identification of accident-prone sections in roadways with incomplete and uncertain inspection-based information: A distributed hazard index based on evidential reasoning approach | Abolfazl Mohamadzadeh Moghaddam | 2018-6 |
Investigating the relationship between driver’s ticket frequency and demographic, behavioral and personal factors; which drivers commit more offences | Abolfazl Mohamadzadeh Moghaddam | 2018-6 |
Joint Slip Formulation Based on Experimental Results in Wind Turbine Lattice Towers | Ahmad Shooshtari | 2018-6 |
Life cycle assessment of concrete production with a focus on air pollutants and the desired risk parameters using genetic algorithm | Seyed Mohsen Karrabi | 2018-6 |
On the shell thickness-stretching effects using seven-parameter triangular element | Mohaamad Rezaiee Pajand | 2018-6 |
Second-Order Statistical Texture Representation of Asphalt Pavement Distress Images Based on Local Binary Pattern in Spatial and Wavelet Domain | Abolfazl Mohamadzadeh Moghaddam,Ali Sahaf | 2018-6 |
structural damage control with interval type-2 fuzzy logic controller | Hassan Haji Kazemi,Abbas Karamodin | 2018-6 |
A family of second-order fully explicit time integration schemes | Mohaamad Rezaiee Pajand | 2018-7 |
A novel cable element for nonlinear thermo-elastic analysis | Mohaamad Rezaiee Pajand | 2018-7 |
An improvement on feature extraction via time series modeling for structural health monitoring based on unsupervised learning methods | Hashem Shariatmadar,Abbas Karamodin | 2018-7 |
Behavior of exterior concrete beam-column joints reinforced with Shape Memory Alloy (SMA) bars | Mohammad Reza Esfahani,Hashem Shariatmadar | 2018-7 |
Controlling Air Pollution in a City: A Perspective from SOAR-PESTLE Analysis | Seyed Mohsen Karrabi | 2018-7 |
Numerical Study of Bond – Slip Mechanism in Advanced Externally Bonded Strengthening Composites | Mohammad Reza Esfahani | 2018-7 |
Size dependent buckling analysis of nano sandwich beams by two schemes | Mohaamad Rezaiee Pajand | 2018-7 |
Enhancement of seismic performance of beam-column joint connections using high performance fiber reinforced cementitious composites | Hashem Shariatmadar | 2018-8 |
Lateral-torsional buckling of functionally graded tapered I-beams considering lateral bracing | Mohaamad Rezaiee Pajand | 2018-8 |
Numerical ANFIS-Based Formulation for Prediction of the Ultimate Axial Load Bearing Capacity of Piles Through CPT Data | Jafar Bolouri Bazaz | 2018-8 |
Path following techniques for geometrically nonlinear structures based on Multi-point methods | Farzad Shahabian Moghadam | 2018-8 |
Stability Analysis of Frame Having FG Tapered Beam–Column | Mohaamad Rezaiee Pajand | 2018-8 |
A Geometrically Non-linear Stochastic Analysis of Two-dimensional Structures made of Neo-hookean Hyperelastic Materials Uusing MLPG Method: Considering Uncertainty in Mechanical Properties | Farzad Shahabian Moghadam | 2018-9 |
A numerical investigation on coupled hydro mechanical behaviour of a high centreline tailings dam | Ali Akhtarpour | 2018-9 |
Dynamic Response of a Tall Building Next to Deep Excavation Considering Soil-Structure Interaction | Ali Akhtarpour | 2018-9 |
Joint slip investigation based on finite element modelling verified by experimental results on wind turbine lattice towers | Ahmad Shooshtari | 2018-9 |
Tapered beam–column analysis by analytical solution | Mohaamad Rezaiee Pajand | 2018-9 |
Using applied operations research and geographical information systems to evaluate effective factors in storage service of municipal solid waste management systems | Shanaz Danesh,Seyed Mohsen Karrabi,Rouzbeh Shad | 2018-9 |
Improving corrosion resistance of steel rebars in concrete with marble and granite waste dust as partial cement replacement | Mohammadreza Tavakkolizadeh | 2018-10 |
Investigating the behavior factor of coupled concrete shear walls with steel coupling beam | Abbas Karamodin | 2018-10 |
Performance of Concrete with Waste Granite Powder: The Effect of Superplasticizers | Mansour Ghalehnovi | 2018-10 |
بررسی آزمایشگاهی رفتار اتصال تیر فولادی به ستون بتنی ( RCS) | Mohammad Reza Esfahani | 2018-10 |
Biodegradation of Phenol by Cold-Tolerant Bacteria Isolated from Alpine Soils of Binaloud Mountains in Iran | Seyed Mohsen Karrabi | 2018-11 |
Highly accurate family of time integration method | Mohaamad Rezaiee Pajand | 2018-11 |
On the Geometrically Nonlinear Analysis of Composite Axisymmetric Shells | Mohaamad Rezaiee Pajand | 2018-11 |
Solving coupled beam-fluid interaction by DTM | Mohaamad Rezaiee Pajand,Ahmad Aftabi Sani | 2018-11 |
A study on the efficiency of a Capped Hardening Elasto-plastic Model for soft clays | Ali Akhtarpour | 2018-12 |
Exterior Concrete Beam-column Connection Reinforced with Glass Fiber Reinforced Polymers -GFRP- bars under CyclicL loading | Hashem Shariatmadar,Mohammad Reza Esfahani | 2018-12 |
Hydraulic Fracturing: a main cause of initiating internal erosion in a high earth-rockfill dam | Ali Akhtarpour | 2018-12 |
Impact of mean velocity accuracy on the estimation of rating curves in compound channels | Mahmoud Faghfour Maghrebi | 2018-12 |
Tensile modeling of steel fiber reinforced concrete | Mohammad Reza Esfahani | 2018-12 |
A Conceptual Model for a Safety-Based Theory of Lean Construction | Seyed Yaser Banihashemi | 2019-1 |
An iterative method for damage identification of skeletal structures utilizing biconjugate gradient method and reduction of search space | Farzad Shahabian Moghadam,Ahmad Aftabi Sani | 2019-1 |
Application of local conditional autoregressive models for development of zonal crash prediction models and identification of crash risk boundaries | Abolfazl Mohamadzadeh Moghaddam | 2019-1 |
Buckling and post-buckling of arbitrary shells under thermo-mechanical loading | Mohaamad Rezaiee Pajand | 2019-1 |
Deflection of axially functionally graded rectangular plates by Green’s function method | Mohaamad Rezaiee Pajand,Ahmad Aftabi Sani | 2019-1 |
Effect of Wetting Process with Presence of Matric Suction on Unsaturated Gypseous Sand Soils | Ali Akhtarpour | 2019-1 |
Experimental Investigation of the Effect of Hybrid Fiber Lightweight Concrete Beams Reinforced with GFRP Bars | Mohammad Reza Esfahani | 2019-1 |
Geometrical nonlinear analysis of structures using residual variables | Mohaamad Rezaiee Pajand | 2019-1 |
Improving seismic performance of composite steel plate shear walls containing openings | Mansour Ghalehnovi | 2019-1 |
Investigating chemical, physical and mechanical properties of eco-cement produced using dry sewage sludge and traditional raw materials | Shanaz Danesh,Mohammadreza Tavakkolizadeh | 2019-1 |
Leak detection in water collection and transmission networks using minimum nodal pressure measurement | Mahmoud Faghfour Maghrebi | 2019-1 |
Mechanical and durability behaviour of concrete with granite waste dust as partial cement replacement under adverse exposure conditions | Mohammadreza Tavakkolizadeh | 2019-1 |
Neuro-fuzzy active control optimized by Tug of war optimization method for seismically excited benchmark highway bridge | Abbas Karamodin | 2019-1 |
Testing and numerical modelling of Steel-Concrete-Steel with stud bolts connectors subject to push-out loading | Mansour Ghalehnovi | 2019-1 |
Thermo-mechanical stability analysis of functionally graded shells | Mohaamad Rezaiee Pajand | 2019-1 |
Two Triangular Membrane Element Based on Strain | Mohaamad Rezaiee Pajand | 2019-1 |
A fast and accurate dynamic relaxation scheme | Mohaamad Rezaiee Pajand | 2019-2 |
A Numerical Investigation on the Performance of the Brick Stair Wall as a Supporting Structure by Considering Adjacent Building | Ehsan Seyedi Hosseininia | 2019-2 |
An economic analysis of industrial wastewater treatment systems using multi-attribute decision-making methods -case study: Toos Industrial Estate, Mashhad, Iran- | Seyed Mohsen Karrabi | 2019-2 |
Application of statistical analysis to evaluate the corrosion resistance of steel rebars embedded in concrete with marble and granite waste dust | Mohammadreza Tavakkolizadeh | 2019-2 |
Comparison of Adaptive magnetorheological elastomer isolator and elastomeric isolator in Near-Field and Far-Field earthquakes | Abbas Karamodin | 2019-2 |
Designing a smart risk analysis method for gas chlorination units of water treatment plants with combination of Failure Mode E ff ects Analysis, Shannon Entropy, and Petri Net Modeling | Seyed Mohsen Karrabi | 2019-2 |
Effect of magnetized water on foam stability and compressive strength of foam concrete | Mohammadreza Tavakkolizadeh | 2019-2 |
Fresh and mechanical properties of roller compacted concrete containing Cationic Asphalt Emulsion admixture | Abolfazl Mohamadzadeh Moghaddam | 2019-2 |
Seismic response modification factor for steel slit panel-frames | Hashem Shariatmadar | 2019-2 |
Structural health monitoring by a new hybrid feature extraction and dynamic time warping methods under ambient vibration and nonstationary signals | Hashem Shariatmadar | 2019-2 |
An Efficient Eigen-Solver and Some of Its Applications | Mohaamad Rezaiee Pajand,Ahmad Aftabi Sani | 2019-3 |
Assessment of AgriculturalWater Resources Sustainability in Arid Regions Using VirtualWater Concept: Case of South Khorasan Province, Iran | Ali Abbasi | 2019-3 |
Damage localization under ambient excitations and non-stationary vibration signals by a new hybrid algorithm for feature extraction and multivariate distance correlation methods | Hashem Shariatmadar | 2019-3 |
Effects of the opening on the behavior of composite steel plate shear wall -CSPSW- | Mansour Ghalehnovi | 2019-3 |
Experimental investigation of steel-concrete-steel slabs with stud bolt connectors subjected to punching loading | Mansour Ghalehnovi | 2019-3 |
Influence of CO2 concentration and N:P ratio on Chlorella vulgaris-assisted nutrient bioremediation, CO2 biofixation and biomass production in a lagoon treatment plant | Shanaz Danesh | 2019-3 |
Nonlinear vibration analysis of carbon nanotube reinforced composite plane structures | Mohaamad Rezaiee Pajand | 2019-3 |
Strengthening of Two-way RC Slabs with Central Opening | Mohammad Reza Esfahani | 2019-3 |
The effect of transverse and flexural reinforcement on deflection and cracking of GFRP bar reinforced concrete beams | Mohammad Reza Esfahani | 2019-3 |
A MODIFIED METHOD FOR MODELLING OF SPREAD FOOTING UNDER UNIFORM DISTRIBUTED LOAD USING WINKLER S MODEL | Ehsan Seyedi Hosseininia | 2019-4 |
Analyzing free vibration of a double-beam joined by a three-degree-of-freedom system | Mohaamad Rezaiee Pajand,Ahmad Aftabi Sani | 2019-4 |
Calibration of bar-Concrete Bond Stress Relationships for Bond Stress Prediction of GFRP Soil Nails Using Experimental Pullout Tests | Jafar Bolouri Bazaz,Saeed Abrishami | 2019-4 |
Nonlinear analysis of FG-sandwich plates and shells | Mohaamad Rezaiee Pajand,Amirreza Masoodi | 2019-4 |
Statistical analysis of effective variables on the performance of waste storage service using geographical information system and response surface | Shanaz Danesh,Seyed Mohsen Karrabi | 2019-4 |
Vibration and static analysis of cracked and non-cracked non-prismatic frames by force formulation | Mohaamad Rezaiee Pajand | 2019-4 |
A new higher-order strain-based plane element | Mohaamad Rezaiee Pajand | 2019-5 |
Analytical solution for optimum location of belt truss based on stability analysis | Amirreza Masoodi | 2019-5 |
Damage detection of multi-girder bridge superstructure based on the modal strain approaches | Mohammad Reza Esfahani,-Kazem -Moslem | 2019-5 |
EFFECT OF SOAKING ON UNSATURATED GYPSEOUS SAND SOILS | Ali Akhtarpour | 2019-5 |
Investigation of the mechanical and physical properties of bio-modified cold asphalt emulsion mixtures by microbial carbonate precipitation | Abolfazl Mohamadzadeh Moghaddam,Seyed Mohsen Karrabi | 2019-5 |
Three stress-based triangular elements | Mohaamad Rezaiee Pajand | 2019-5 |
Time trends in gender-specific incidence rates of road traffic injuries in Iran | Abolfazl Mohamadzadeh Moghaddam | 2019-5 |
Using statistical analysis and laboratory testing to evaluate the effect of magnetized water on the stability of foaming agents and foam concrete | Mohammadreza Tavakkolizadeh | 2019-5 |
بررسی آزمایشگاهی اثر تخلخل و زاویه موانع نفوذپذیر بر رسوبگذاری جریان غلیظ | Mahmoud Faghfour Maghrebi | 2019-5 |
Anaerobic co-digestion of poultry slaughterhouse wastes with sewage sludge in batch-mode bioreactors (effect of inoculum-substrate ratio and total solids) | Seyed Mohsen Karrabi,Shanaz Danesh | 2019-6 |
Boundary characteristic orthogonal polynomials method in the vibration analysis of multi-span plates acting upon a moving mass | Mansour Ghalehnovi,Hashem Shariatmadar | 2019-6 |
Creating better dynamic relaxation methods | Mohaamad Rezaiee Pajand | 2019-6 |
Investigating the Rutting Behavior of Modified Asphalt Mixtures with Waste Materials | Ali Sahaf,Abolfazl Mohamadzadeh Moghaddam | 2019-6 |
Mechanical Behavior of Dam Foundation with Vertical Sand Drain, Case Study: Sombar Dam | Ali Akhtarpour | 2019-6 |
Stage-discharge estimation in compound open channels with composite roughness | Mahmoud Faghfour Maghrebi | 2019-6 |
A novel meshless particle method for nonlocal analysis of two-directional functionally graded nanobeams | Mohaamad Rezaiee Pajand | 2019-7 |
Development and Comparison of Two New Methods for Quantifying Uncertainty in Analysis of Flow Through Rockfill Structures | Seyed Mahmood Hosseini | 2019-7 |
Experimental and numerical study of the RC beams shear-strengthened with NSM technique | Mohammad Reza Esfahani | 2019-7 |
Improving the resistance to moisture damage of cold mix asphalt modified by eco-friendly Microbial Carbonate Precipitation (MCP) | Abolfazl Mohamadzadeh Moghaddam,Seyed Mohsen Karrabi | 2019-7 |
Output-only modal identification by in-operation modal appropriation for use with enhanced frequency domain decomposition method | Ahmad Shooshtari | 2019-7 |
Shear strengthening of RC beams using EBRIG CFRP strips: a comparative study | Mohammad Reza Esfahani | 2019-7 |
A simple innovative method for calibration of Manning’s roughness coefficient in rivers using a similarity concept | Seyed Mahmood Hosseini | 2019-8 |
Calculation of coupled modes of uid-structure systems by pseudo symmetric subspace iteration method | Ahmad Aftabi Sani | 2019-8 |
Effect of fibers and hybrid fibers on the shear strength of lightweight concrete beams reinforced with GFRP bars | Mohammad Reza Esfahani | 2019-8 |
Nonlocal geometrically nonlinear dynamic analysis of nanobeam using a meshless method | Farzad Shahabian Moghadam | 2019-8 |
Virtual Water Flow and Water Footprint Assessment of an Arid Region: A Case Study of South Khorasan Province, Iran | Ali Abbasi | 2019-8 |
A 6-parameter triangular flat shell element for nonlinear analysis | Mohaamad Rezaiee Pajand | 2019-9 |
A new method for damage detection of fluid-structure systems based on model updating strategy and incomplete modal data | Farzad Shahabian Moghadam,Ahmad Aftabi Sani | 2019-9 |
An experimental investigation on effect of elevated temperatures on bond strength between externally bonded CFRP and concrete | Mohammadreza Tavakkolizadeh | 2019-9 |
Application of Hencky bar-chain model to buckling analysis of elastically restrained Timoshenko axially functionally graded carbon nanotube reinforced composite beams | Mohaamad Rezaiee Pajand | 2019-9 |
Application of MODFLOW with Boundary Conditions Analyses Based on Limited Available Observations: A Case Study of Birjand Plain in East Iran | Ali Abbasi | 2019-9 |
Cyclic behaviour of geocell-reinforced backfill behind integral bridge abutment | Jafar Bolouri Bazaz | 2019-9 |
Effect of fiber hybridization on energy absorption and synergy in concrete | Mohammad Reza Esfahani | 2019-9 |
Estimation of water surface profiles using rating curves | Mahmoud Faghfour Maghrebi | 2019-9 |
Shell instability analysis by using mixed interpolation | Mohaamad Rezaiee Pajand | 2019-9 |
Strengthening of circular RC column-foundation connections with GFRP/SMA bars and CFRP wraps | Mohammad Reza Esfahani,Mohammadreza Tavakkolizadeh | 2019-9 |
A simplified solution for piled-raft foundation analysis by using the two-phase approach | Ehsan Seyedi Hosseininia | 2019-10 |
Analyzing FG shells with large deformations and finite rotations | Mohaamad Rezaiee Pajand,Amirreza Masoodi | 2019-10 |
Damage Detection of Bridge by Rayleigh-Ritz Method | Abbas Karamodin | 2019-10 |
Experimental Investigation of Bond Stress and Creep Displacements of GFRP Soil Nails Simulated in a Soil Box | Jafar Bolouri Bazaz,Saeed Abrishami | 2019-10 |
Experimental investigation on the behavior of fine-grained soils containing waste rubber tires under repeated and static loading using direct shear apparatus | Saeed Abrishami,Ehsan Seyedi Hosseininia | 2019-10 |
Experimental study on effect of EBRIG shear strengthening method on the behavior of RC beams | Mohammad Reza Esfahani | 2019-10 |
Geometrically Nonlinear Analysis of Structures Using Various Higher Order Solution Methods: A Comparative Analysis for Large Deformation | Farzad Shahabian Moghadam | 2019-10 |
Linear and geometrically nonlinear analysis of plane structures by using a new locking free triangular element | Mohaamad Rezaiee Pajand | 2019-10 |
Simplification through regression analysis on the dynamic response of plates with arbitrary boundary conditions excited by moving inertia load | Hashem Shariatmadar,Mansour Ghalehnovi | 2019-10 |
A formula for calculating fundamental natural frequency of partially-filled tanks | Mohaamad Rezaiee Pajand,Ahmad Aftabi Sani | 2019-11 |
A robust approach for rating curves estimation in open channels using isovel contours | Mahmoud Faghfour Maghrebi | 2019-11 |
Data-driven damage diagnosis under environmental and operational variability by novel statistical pattern recognition methods | Hashem Shariatmadar,Abbas Karamodin | 2019-11 |
Evaluation of the mixed mode (I/II) fracture toughness of cement emulsified asphalt mortar (CRTS-II) using mixture design of experiments | Abolfazl Mohamadzadeh Moghaddam,Ali Sahaf | 2019-11 |
Fatigue Risk Management: Assessing and Ranking the Factors Affecting the Degree of Fatigue and Sleepiness of Heavy-Vehicle Drivers Using TOPSIS and Statistical Analyses | Abolfazl Mohamadzadeh Moghaddam | 2019-11 |
Implementing green roof technology: an investigation of the effects on energy demand, fuel consumption, and pollutant emission | Seyed Mohsen Karrabi | 2019-11 |
Investigating the effects of recycled PET particles, shredded recycled steel fibers and Metakaolin powder on the properties of RCCP | Abolfazl Mohamadzadeh Moghaddam | 2019-11 |
Macromodel-based simulation of membrane action in reinforced concrete structural members | Mohammad Reza Esfahani,Mohammadreza Tavakkolizadeh | 2019-11 |
Optimization of flexible lift processes on high-rise building construction sites | Mojtaba Maghrebi | 2019-11 |
Proposition of new applicable strength models for concrete columns confined with fiber reinforced polymers | Mohammadreza Tavakkolizadeh | 2019-11 |
Self-compacting architectural concrete production using red mud | Mansour Ghalehnovi | 2019-11 |
Uncertainty in Rating-Curves Due to Manning Roughness Coefficient | Mahmoud Faghfour Maghrebi | 2019-11 |
A novel anomaly detection method based on adaptive Mahalanobis-squared distance and one-class kNN rule for structural health monitoring under environmental effects | Abbas Karamodin | 2019-12 |
A Study on the Optimization of the Performance of Type 1 Fuzzy Controller Based on the IDA Method | Hassan Haji Kazemi,Abbas Karamodin | 2019-12 |
An efficient mixed interpolated curved beam element for geometrically nonlinear analysis | Mohaamad Rezaiee Pajand | 2019-12 |
An energy balance method for seismic analysis of cable-stayed bridges | Ahmad Shooshtari | 2019-12 |
Effect of red mud (bauxite residue) as cement replacement on the properties of self-compacting concrete incorporating various fillers | Mansour Ghalehnovi | 2019-12 |
Flexural Behavior of Lightweight Concrete Beams Reinforced with GFRP Bars and Effects of the Added Micro and Macro Fiber | Mohammad Reza Esfahani | 2019-12 |
Improved bending behaviour of steel-fibre-reinforced recycled aggregate concrete beams with a concrete jacket | Mansour Ghalehnovi | 2019-12 |
Investigation of the fatigue characteristics of warm stone matrix asphalt (WSMA) containing electric arc furnace (EAF) steel slag as coarse aggregate and Sasobit as warm mix additive | Ali Sahaf | 2019-12 |
Seismic Behavior of High-Performance Fiber-Reinforced Cement Composites Beam-Column Connection with High Damage Tolerance | Hashem Shariatmadar | 2019-12 |
Stress Analysis by Two Cuboid Isoparametric Elements | Mohaamad Rezaiee Pajand | 2019-12 |
The fatigue behavior of SBS/nanosilica composite modified asphalt binder and mixture | Ali Sahaf | 2019-12 |
Consolidation assessment using Multi Expression Programming | Saeed Abrishami | 2020-1 |
First order control variates algorithm for reliability analysis of engineering structures | Mansour Ghalehnovi | 2020-1 |
Improving Efficiency of Normative Interventions by Characteristic-Based Selection of Households: An Agent-Based Approach | Mojtaba Maghrebi | 2020-1 |
Integrating Household Travel Survey and Social Media Data to Improve the Quality of OD Matrix: A Comparative Case Study | Mojtaba Maghrebi | 2020-1 |
Modeling spatial nonstationary and overdispersed crash data: Development and comparative analysis of global and geographically weighted regression models applied to macrolevel injury crash data | Abolfazl Mohamadzadeh Moghaddam | 2020-1 |
Three Different Methods for Approximate Analysis of Bar Structures | Mohaamad Rezaiee Pajand | 2020-1 |
Two rectangular elements based on analytical functions | Mohaamad Rezaiee Pajand | 2020-1 |
Water-Saving Scenarios Based on Input–Output Analysis and Virtual Water Concept: A Case in Iran | Ali Abbasi | 2020-1 |
A family of cylindrical elements | Mohaamad Rezaiee Pajand,Ahmad Aftabi Sani | 2020-2 |
An integrated approach to suitability assessment of municipal solid waste landfills in New South Wales, Australia | Mojtaba Maghrebi | 2020-2 |
Development of applicable design models for concrete columns confined with aramid fiber reinforced polymer using Multi-Expression Programming | Mohammadreza Tavakkolizadeh | 2020-2 |
Effect of concrete strength and longitudinal reinforcement arrangement on the performance of reinforced concrete beams strengthened using EBR and EBROG methods | Mohammad Reza Esfahani | 2020-2 |
Effective strain of CFRP in RC beams strengthened in shear with NSM reinforcements | Mohammad Reza Esfahani | 2020-2 |
Extending BIM Interoperability for Real-Time Concrete Formwork Process Monitoring | Mojtaba Maghrebi | 2020-2 |
Finding buckling points for nonlinear structures by dynamic relaxation scheme | Mohaamad Rezaiee Pajand | 2020-2 |
Free vibration of a nanogrid based on Eringen’s stress gradient model | Mohaamad Rezaiee Pajand,Ahmad Aftabi Sani | 2020-2 |
Targeted selection of participants for energy efficiency programs using genetic agent-based (GAB) framework | Mojtaba Maghrebi | 2020-2 |
The nonlinear dynamic analysis of elasto-plastic behaviour of the single-curved FGM shells under impact load | Farzad Shahabian Moghadam | 2020-2 |
A multi-fiber approach with directional stiffness matrix in reinforced concrete structures | Mohammad Reza Esfahani,Mohammadreza Tavakkolizadeh | 2020-3 |
اثر رسوبگذاری کلسیم کربنات توسط عامل باکتریایی بر پوشش قیری و عریانشدگی مخلوطهای آسفالتی سرد | Abolfazl Mohamadzadeh Moghaddam,Seyed Mohsen Karrabi | 2020-3 |
Constitutive modeling of steel fiber-reinforced concrete | Mohammad Reza Esfahani | 2020-3 |
Instability of saturated granular materials in biaxial loading with polygonal particles using discrete element Method (DEM) | Ehsan Seyedi Hosseininia | 2020-3 |
Investigating loading rate and fibre densities influence on SRG - concrete bond behaviour | Mohammad Reza Esfahani | 2020-3 |
Relationships for prediction of backstay effect in tall buildings with core-wall system | Hashem Shariatmadar | 2020-3 |
Development of the delta-normal stress combining CE-QUAL-W2 as a novel method for spatio-temporal monitoring of water quality in Karkheh Dam Reservoir | Seyed Mohsen Karrabi | 2020-4 |
Finding the nearest facility for travel and waiting time in a transport network | Abolfazl Mohamadzadeh Moghaddam | 2020-4 |
Geometrically nonlinear dynamic analysis of FG graphene platelets-reinforced nanocomposite cylinder: MLPG method based on a modified nonlinear micromechanical model | Farzad Shahabian Moghadam | 2020-4 |
Higher-order assumed strain plane element immune to mesh distortion | Mohaamad Rezaiee Pajand | 2020-4 |
Impact of law enforcement and increased traffic fines policy on road traffic fatality, injuries and offenses in Iran: Interrupted time series analysis | Abolfazl Mohamadzadeh Moghaddam | 2020-4 |
Using Higher-Order Strain Interpolation Function to Improve the Accuracy of Structural Responses | Mohaamad Rezaiee Pajand | 2020-4 |
A sensitivity‐based finite element model updating based on unconstrained optimization problem and regularized solution methods | Mohaamad Rezaiee Pajand | 2020-5 |
DESIGN, TESTING AND DETAILED COMPONENT MODELING OF A DOUBLE TELESCOPING SELF-CENTERINGENERGY-DISSIPATIVE BRACE (DT-SCED) | Abbas Karamodin | 2020-5 |
Investigation of suspended particle size effects on clogging of soil filters under laminar flow | Seyed Mohsen Karrabi | 2020-5 |
On model-based damage detection by an enhanced sensitivity function of modal flexibility and LSMR-Tikhonov method under incomplete noisy modal data | Mansour Ghalehnovi | 2020-5 |
Proposition of an equivalent reduced thickness for composite steel plate shear walls containing an opening | Mansour Ghalehnovi | 2020-5 |
A simple iterative method for the analysis of plane trusses | Ahmad Aftabi Sani | 2020-6 |
Early damage detection under massive data via innovative hybrid methods: application to a large-scale cable-stayed bridge | Abbas Karamodin | 2020-6 |
A robust updated normal plane scheme for geometric non-linear structural analysis | Mohaamad Rezaiee Pajand | 2020-7 |
Analytical Scheme for Solid Stress Analysis | Mohaamad Rezaiee Pajand | 2020-7 |
Crack Spacing Prediction of Fibre-Reinforced Concrete Beams with Lap-Spliced Bars by Machine Learning Models | Mohaamad Rezaiee Pajand | 2020-7 |
Effect of Reinforcement Type on the Tension Stiffening Model of Ultra-High Performance Concrete (UHPC) | Mansour Ghalehnovi | 2020-7 |
Experimental evaluation of self-centering hybrid coupled wall subassemblies with friction dampers | Mohammad Reza Esfahani | 2020-7 |
Extreme subsidence in a populated city (Mashhad) detected by PSInSAR considering groundwater withdrawal and geotechnical properties | Saeed Abrishami | 2020-7 |
GFRP as an alternative for steel nails, development of a model for prediction of creep displacements using experimental tests | Jafar Bolouri Bazaz,Saeed Abrishami | 2020-7 |
Hygro-thermo-elastic nonlinear analysis of functionally graded porous composite thin and moderately thick shallow panels | Mohaamad Rezaiee Pajand | 2020-7 |
Improved shell element for geometrically non-linear analysis of thin-walled structures | Mohaamad Rezaiee Pajand | 2020-7 |
The cost-effective and multi-objective optimal positioning of active actuators based on tug of war method in seismically excited benchmark highway bridge | Abbas Karamodin | 2020-7 |
Developing a Feature Extraction of Existing Structures Using an Ambient Vibration Test | Hassan Haji Kazemi | 2020-8 |
Estimation of capillary rise in unsaturated gypseous sand soils | Ali Akhtarpour | 2020-8 |
How can communication networks among excavator crew members in construction projects affect the relationship between safety climate and safety outcomes? | Seyed Yaser Banihashemi | 2020-8 |
Hyperspectral image clustering with Albedo recovery Fuzzy C-Means | Rouzbeh Shad,Hossein Etemadfard | 2020-8 |
Performance of riffle structures on the stabilization of two successive knickpoints over a sandy bed | Mohammad Reza Jaefarzadeh | 2020-8 |
Strain-based plane element for fracture mechanics’ problems | Mohaamad Rezaiee Pajand | 2020-8 |
Assessment of Virtual Water Flows in Iran Using a Multi-Regional Input-Output Analysis | Ali Abbasi | 2020-9 |
Damage diagnosis of bridge girders via modal flexibility deflections, inertia force vectors, and strain energies | Mohammad Reza Esfahani,-Kazem -Moslem | 2020-9 |
Experimental and numerical investigation of shear performance of RC beams strengthened with FRP using grooving method | Mohammad Reza Esfahani | 2020-9 |
Experimental Investigation of Porosity, Installation angle, Thickness and Second Layer of Permeable Obstacles on Density Current | Mahmoud Faghfour Maghrebi | 2020-9 |
Experimental study on estimation of diversion rate in porous bottom intakes for non-sediment flow | Mahmoud Faghfour Maghrebi | 2020-9 |
Induction of microbial carbonate precipitation as a sustainable strategy for post-improvement and remediation of cold mix asphalt | Abolfazl Mohamadzadeh Moghaddam,Seyed Mohsen Karrabi | 2020-9 |
Political Skill Improves the Effectiveness of Emotional Intelligence: Bayesian Network Analysis in the Construction Industry | Mojtaba Maghrebi | 2020-9 |
The cyclic response of circular reinforced concrete column to foundation connections strengthened with shape memory alloy bars | Mohammad Reza Esfahani,Mohammadreza Tavakkolizadeh | 2020-9 |
A multi-criteria decision support framework for municipal solid waste landfill siting: a case study of New South Wales (Australia) | Mojtaba Maghrebi | 2020-10 |
A PARTICLE SWARM OPTIMIZATION ALGORITHM TO SUGGEST FORMULAS FOR THE BEHAVIOUR OF THE RECYCLED MATERIAL REINFORCED CONCRETE BEAMS | Mohaamad Rezaiee Pajand | 2020-10 |
An experimental study on post-punching behavior of flat slabs | Mohammad Reza Esfahani | 2020-10 |
Condition Assessment of Civil Structures for Structural Health Monitoring Using Supervised Learning Classification Methods | Hashem Shariatmadar | 2020-10 |
Crack Width and Propagation in Recycled Coarse Aggregate Concrete Beams Reinforced with Steel Fibres | Mansour Ghalehnovi | 2020-10 |
Effect of magnetized water on the fresh, hardened and durability properties of mortar mixes with marble waste dust as partial replacement of cement | Mohammadreza Tavakkolizadeh | 2020-10 |
Experimental study on the behavior of eccentrically loaded circular footing model resting on reinforced sand | Saeed Abrishami | 2020-10 |
Free vibration analysis of functionally graded hybrid matrix/fiber nanocomposite conical shells using multiscale method | Mohaamad Rezaiee Pajand | 2020-10 |
Numerical Investigation on the Deformational Behavior of Continuous Buried Pipelines Under Reverse Faulting | Ehsan Seyedi Hosseininia | 2020-10 |
Seismic Response of Multistory Buildings with Double Telescoping Self-Centering Energy-Dissipative Brace (DT-SCED) | Abbas Karamodin | 2020-10 |
Study on the seismic behaviour of steel shear plates | Mohaamad Rezaiee Pajand | 2020-10 |
Two-Phase Approach for the Analysis of Laterally Loaded Pile Groups in Sandy Soils | Ehsan Seyedi Hosseininia | 2020-10 |
Behavior of Eccentrically Inclined Loaded Ring Footings Resting on Granular Soil | Jafar Bolouri Bazaz | 2020-11 |
Bridge-type structures analysis using RMP concept considering shear and bending flexibility | Mohaamad Rezaiee Pajand | 2020-11 |
Evaluating the effect of electric arc furnace steel slag on dynamic and static mechanical behavior of warm mix asphalt mixtures | Seyed Ali Ziaee | 2020-11 |
Exact post-buckling analysis of planar and space trusses | Mohaamad Rezaiee Pajand | 2020-11 |
Exact solution for thermal–mechanical post-buckling of functionally graded micro-beams | Mohaamad Rezaiee Pajand | 2020-11 |
Fast unsupervised learning methods for structural health monitoring with large vibration data from dense sensor networks | Hashem Shariatmadar | 2020-11 |
Mixed mode (I/II) fracture energy of cement emulsified asphalt mortar under intermediate temperature | Abolfazl Mohamadzadeh Moghaddam,Ali Sahaf | 2020-11 |
Reanalysis of 2D and 3D truss structures considering simultaneous variations in topology, geometry and size | Mohaamad Rezaiee Pajand | 2020-11 |
Semi-analytical vibrational analysis of functionally graded carbon nanotubes coupled conical-conical shells | Mohaamad Rezaiee Pajand | 2020-11 |
The effect of different loading patterns on the resistance to shear flow of hot mix asphalt | Ali Sahaf | 2020-11 |
An efficient curved beam element for thermo-mechanical nonlinear analysis of functionally graded porous beams | Mohaamad Rezaiee Pajand,Amirreza Masoodi | 2020-12 |
Early damage assessment in large-scale structures by innovative statistical pattern recognition methods based on time series modeling and novelty detection | Hashem Shariatmadar | 2020-12 |
Fault-Tolerant Damage Control of Nonlinear Structures Using Artificial Intelligence | Abbas Karamodin,Hassan Haji Kazemi | 2020-12 |
Investigation of shear strength correlations and reliability assessments of sandwich structures by kriging method | Mansour Ghalehnovi | 2020-12 |
Investigation of the Behaviour of Steel-Concrete-Steel Sandwich Slabs with Bi-Directional Corrugated-Strip Connectors | Mansour Ghalehnovi | 2020-12 |
Low temperature fracture resistance of cement emulsified asphalt mortar under mixed mode I/III loading | Abolfazl Mohamadzadeh Moghaddam,Ali Sahaf | 2020-12 |
Progressive Sidesway Collapse Analysis of Steel Moment-Resisting Frames Under Earthquake Excitations | Abbas Karamodin | 2020-12 |
A dynamic order reduction method for fluid-structure systems | Farzad Shahabian Moghadam,Ahmad Aftabi Sani | 2021-1 |
A hybrid sensitivity function and Lanczos bidiagonalization-Tikhonov method for structural model updating: Application to a full-scale bridge structure | Mohaamad Rezaiee Pajand | 2021-1 |
Bond behaviour of high-strength steel rebars in normal (NSC) and ultra-high performance concrete (UHPC) | Mansour Ghalehnovi | 2021-1 |
Damage detection of cylindrical shells based on Sander's theory and model updating using incomplete modal data considering random noises | Farzad Shahabian Moghadam,Ahmad Aftabi Sani | 2021-1 |
Investigation of the main and interactive effects of mix design factors on the properties of cement emulsified asphalt mortars using Mixture Design of experiment | Abolfazl Mohamadzadeh Moghaddam | 2021-1 |
Static and dynamic analysis of FG plates using a locking free 3D plate bending element | Mohaamad Rezaiee Pajand | 2021-1 |
Applying the methods of BCOP and matrix exponential in the vibration analysis of multi-span composite plates under opposing moving inertia loads | Mansour Ghalehnovi,Hashem Shariatmadar | 2021-2 |
Differential effects of stimulant versus opiate drugs on driving performance | Abolfazl Mohamadzadeh Moghaddam | 2021-2 |
Experimental Study of Octagonal Steel Columns Filled with Plain and Fiber Concrete under the Influence of Compressive Axial Load with Eccentricity | Mansour Ghalehnovi | 2021-2 |
Investigation Responses of the Diagrid Structural System of High-rise Buildings Equipped with Tuned Mass Damper Using New Dynamic Method | Mansour Ghalehnovi | 2021-2 |
Nonlinear analysis of cable structures using the dynamic relaxation method | Mohaamad Rezaiee Pajand | 2021-2 |
Particulate Modeling of Sand Production Using Coupled DEM-LBM | Ehsan Seyedi Hosseininia | 2021-2 |
Determining optimum staged-evacuation schedule considering total evacuation time, congestion severity and fire threats | Mojtaba Maghrebi,Mahmoud Faghfour Maghrebi | 2021-3 |
Modeling the ionospheric gradient by using VSS base functions and GPS data over Iran | Hossein Etemadfard | 2021-3 |
A simple and robust method for identifying the distribution functions of Manning’s roughness coefficient along a natural river | Seyed Mahmood Hosseini | 2021-4 |
An Efficient Weighted Residual Time Integration Family | Mohaamad Rezaiee Pajand | 2021-4 |
Experimental Evaluation of Dowel Action in Ultra-High Performance Concrete | Mansour Ghalehnovi | 2021-4 |
Mechanical and Durability Properties of Mortars Incorporating Red Mud, Ground Granulated Blast Furnace Slag, and Electric Arc Furnace Dust | Mansour Ghalehnovi | 2021-4 |
Psychosocial factors associated with the self-reported frequency of cell phone use while driving in Iran | Abolfazl Mohamadzadeh Moghaddam,Esmaeel Ayati | 2021-4 |
Structural health monitoring using high-dimensional features from time series modeling by innovative hybrid distance-based methods | Abbas Karamodin | 2021-4 |
The Effect of Nonlinear Behavior of Bolted Connections on Dynamic Analysis of Steel Transmission Towers | Ahmad Shooshtari | 2021-4 |
Using existing site surveillance cameras to automatically measure the installation speed in prefabricated timber construction | Mojtaba Maghrebi | 2021-4 |
A Force-Based Rectangular Cracked Element | Mohaamad Rezaiee Pajand | 2021-5 |
Calculation of Equivalent Axle Load Factor Based on Artificial Intelligence | Ali Sahaf | 2021-5 |
Evaluation of Chemical Parameters of Urban Drinking Water Quality along with Health Risk Assessment: A Case Study of Ardabil Province, Iran | Ali Abbasi | 2021-5 |
Experimental analysis on tensile strengthening properties of steel and glass ber reinforced inorganic matrix composites | Mohammad Reza Esfahani | 2021-5 |
OPTIMIZING MASS FOR VIBRATION ANALYSIS OF PLANE STRUCTURE | Mohaamad Rezaiee Pajand | 2021-5 |
A study on the effects of piled-raft foundations on the seismic response of a high rise building resting on clayey soil | Ali Akhtarpour,Abbas Karamodin | 2021-6 |
Analytical solutions for surface stress effects on buckling and post-buckling behavior of thin symmetric porous nano-plates resting on elastic foundation | Farzad Shahabian Moghadam | 2021-6 |
Analytical study on torsional behavior of concrete beams strengthened with fiber reinforced polymer laminates using softened truss model | Mohammadreza Tavakkolizadeh | 2021-6 |
Analyzing of thick plates with cutouts using the meshless (EFG) method based on higher order shear deformation theories for solving shearlocking issue | Farzad Shahabian Moghadam | 2021-6 |
Critical buckling moment of functionally graded tapered mono-symmetric I-beam | Mohaamad Rezaiee Pajand | 2021-6 |
Effect of Hydrocarbon Contamination on Biostabilization of Soil Contaminated with Motor Oil and Gasoline | Jafar Bolouri Bazaz | 2021-6 |
Evaluation of COVID-19 Spread Effect on the Commercial Instagram Posts using ANN: A Case Study on The Holy Shrine in Mashhad Iran | Hossein Etemadfard,Rouzbeh Shad | 2021-6 |
Investigating the effect of cationic emulsified bitumen as an admixture of roller-compacted concrete pavement on the progress of alkali-silica reaction | Abolfazl Mohamadzadeh Moghaddam | 2021-6 |
Prediction of boundary shear stress distribution in straight open channels using velocity distribution | Mahmoud Faghfour Maghrebi | 2021-6 |
Simultaneous effect of granite waste dust as partial replacement of cement and magnetized water on the properties of concrete exposed to NaCl and H2SO4 solutions | Mohammadreza Tavakkolizadeh | 2021-6 |
The Role of Spatial Gradient on Vertical Total Electron Content Extraction From Geodetic Very Long Baseline Interferometry Observation: Case Study CONT08 to CONT17‐L1 | Hossein Etemadfard | 2021-6 |
بررسی عملکرد غشائی در ظرفیت باربری تیرهای بتن مسلح لاغر مقید | Mohammad Reza Esfahani | 2021-6 |
CO Emissions Modeling and Prediction using ANN and GIS | Hossein Etemadfard,Rouzbeh Shad | 2021-7 |
Considerations of Vertical Acceleration Induced by Horizontal Earthquake Record for a Building with Underground Stories Based on a SSI 3D Model | Ali Akhtarpour | 2021-7 |
Damage Localization of RC Beams via Wavelet Analysis of Noise Contaminated Modal Curvatures | Mohammad Reza Esfahani | 2021-7 |
Evaluation of Integrating SWAT Model into a Multi-Criteria Decision Analysis towards Reliable Rainwater Harvesting Systems | Ali Abbasi | 2021-7 |
Factors affecting unmanned aerial vehicles’ safety: A post-occurrence exploratory data analysis of drones’ accidents and incidents in Australia | Mojtaba Maghrebi | 2021-7 |
Improvement of wastewater sludge dewatering using ferric chloride, aluminum sulfate, and calcium oxide (experimental investigation and descriptive statistical analysis) | Seyed Mohsen Karrabi,Shanaz Danesh | 2021-7 |
Numerical Evaluation of Slope Stability for Construction and Seismic Loads: Case Study | Ali Akhtarpour | 2021-7 |
Post-earthquake fire resistance of tall steel concentrically braced frames | Abbas Karamodin | 2021-7 |
A new method for estimating pollutant concentration in unsaturated soil using digital image processing technique | Ali Akhtarpour | 2021-8 |
An Analytical Model to Study the Behavior of Non-connected Piled Rafts with Granular Cushion Subjected to Vertical Load | Jafar Bolouri Bazaz | 2021-8 |
Calculating TIN‐Based 3D Sight Distance and Its Evaluation on Drivers Free‐Flow Speed | Ali Sahaf,Abolfazl Mohamadzadeh Moghaddam | 2021-8 |
Empirical correlation between length of nail and system parameters for a vertical soil nailed wall | Jafar Bolouri Bazaz,Ali Akhtarpour | 2021-8 |
Evaluation of Traffic Noise Pollution Around The Shrine of Imam Reza Using GIS And Descriptive Statistics Analysis (A Case Study of Mashhad, Iran) | Seyed Mohsen Karrabi | 2021-8 |
Finite element analysis of rectangular RC beams strengthened with FRP laminates under pure torsion | Mohammadreza Tavakkolizadeh | 2021-8 |
Flexural strength enhancement of recycled aggregate concrete beams with steel fibre-reinforced concrete jacket | Mansour Ghalehnovi | 2021-8 |
Numerical study on the effect of excavation dewatering on the contaminant emission in sandy soil | Ali Akhtarpour | 2021-8 |
Preliminary Valorization of Climatic Conditions Effects on Curing of Air Lime-Based Mortars for Restorative Applications in the Pasargadae and Persepolis World Heritage Sites | Hashem Shariatmadar | 2021-8 |
Propose new implement models to determine the compressive, tensile and flexural strengths of recycled coarse aggregate concrete via imperialist competitive algorithm | Mohaamad Rezaiee Pajand | 2021-8 |
Uncertainty Analysis of Stage-Discharge Curves by Generalized Likelihood Uncertainty Estimation (GLUE) Method | Mahmoud Faghfour Maghrebi | 2021-8 |
Applying a new systematic fuzzy FMEA technique for risk management in light steel frame systems | Hashem Shariatmadar | 2021-9 |
Evaluation of Rutting and Fatigue Behaviors of Asphalt Binders Modified with Calcium Lignosulfonate | Jafar Bolouri Bazaz,Seyed Ali Ziaee | 2021-9 |
Experimental Investigation on the Shear Behaviour of Stud-Bolt Connectors of Steel-Concrete-Steel Fibre-Reinforced Recycled Aggregates Sandwich Panels | Mansour Ghalehnovi | 2021-9 |
Review of the strain-based formulation for analysis of plane structures Part I: Formulation of basics and the existing elements | Mohaamad Rezaiee Pajand | 2021-9 |
Review of the strain-based formulation for analysis of plane structures Part II: Evaluation of the numerical performance | Mohaamad Rezaiee Pajand | 2021-9 |
Two-Dimensional Geometrically Nonlinear Hyperelastic Wave Propagation Analysis in FG Thick Hollow Cylinders using MLPG Method | Farzad Shahabian Moghadam | 2021-9 |
مطالعه آزمایشگاهی تقویت دالهای بتنآرمه دوطرفه با استفاده از ورقهای فولادی پانچ شده | Hassan Haji Kazemi | 2021-9 |
3D Sight Distance Calculation and Estimation of its Effect on Road Accidents in GIS Environment | Ali Sahaf | 2021-10 |
Characterization, geostatistical modeling and health risk assessment of potentially toxic elements in groundwater resources of northeastern Iran | Ali Abbasi | 2021-10 |
Durability and Mechanical Properties of Roller Compacted Concrete Containing Coarse Reclaimed Asphalt Pavement | Abolfazl Mohamadzadeh Moghaddam | 2021-10 |
Estimating the potential of energy generation by anaerobic digestion of slaughterhouse wastes toward sustainable waste management strategy: a case study | Seyed Mohsen Karrabi | 2021-10 |
Hybrid active control of adjacent buildings interconnected by viscous dampers utilizing type-2 fuzzy controller considering soil-structure interaction | Hashem Shariatmadar | 2021-10 |
Investigating green roofs’ CO2 sequestration with cold- and drought-tolerant plants (a short- and long-term carbon footprint view) | Seyed Mohsen Karrabi | 2021-10 |
Leakage detection in water distribution networks by the use of analytical and experimental models | Mahmoud Faghfour Maghrebi | 2021-10 |
Properties of Fibre-Reinforced High-Strength Concrete with Nano-Silica and Silica Fume | Mansour Ghalehnovi | 2021-10 |
Risk of fire emergency evacuation in complex construction sites: Integration of 4D-BIM, social force modeling, and fire quantitative risk assessment | Mojtaba Maghrebi | 2021-10 |
Vibration of FG-CNT and FG-GNP sandwich composite coupled Conical-Cylindrical-Conical shell | Amirreza Masoodi | 2021-10 |
Easy function for solving linear elasticity problems | Mohaamad Rezaiee Pajand | 2021-11 |
Nonlinear static and dynamic behaviors assessment of self-centering post-tensioned concrete wall with multiple-slit device | Ahmad Shooshtari | 2021-11 |
A Literature Review on Dynamic Analysis of Concrete Gravity and Arch Dams | Mohaamad Rezaiee Pajand,Ahmad Aftabi Sani | 2021-12 |
Application of surface velocimetry in estimating rating curves in compound channels | Mahmoud Faghfour Maghrebi | 2021-12 |
Effect of Perforated Plates on the Relative Density of Uniformly Graded Reconstituted Sands Using Air Pluviation Method | Saeed Abrishami | 2021-12 |
Natural frequency responses of hybrid polymer/carbon fiber/FG-GNP nanocomposites paraboloidal and hyperboloidal shells based on multiscale approaches | Amirreza Masoodi | 2021-12 |
New Model for the Lap-Splice Length of Tensile Reinforcement in Concrete Elements | Mansour Ghalehnovi | 2021-12 |
Nonlinear Deformation and Numerical Post-Buckling Analysis of Plate Structures Using the Assumed Natural Strain Concept | Mohaamad Rezaiee Pajand | 2021-12 |
Numerical study on the flexural behaviour of normal- and high-strength concrete beams reinforced with GFRP bar, using different amounts of transverse reinforcement | Mohammad Reza Esfahani | 2021-12 |
On the performance of HLL, HLLC, and Rusanov solvers for hyperbolic traffic models | Abolfazl Mohamadzadeh Moghaddam,Ali Sahaf | 2021-12 |
The pros and cons of using calcium lignosulfonate as a recycled anti-aging additive on engineering properties of bituminous mastics | Jafar Bolouri Bazaz,Seyed Ali Ziaee | 2021-12 |
Wavelet-based damage localization and severity estimation of experimental RC beams subjected to gradual static bending tests | Mohammad Reza Esfahani | 2021-12 |
Agglomerated impact of CNT vs. GNP nanofillers on hybridization of polymer matrix for vibration of coupled hemispherical-conical-conical shells | Amirreza Masoodi | 2022-1 |
AK-SESC: a novel reliability procedure based on the integration of active learning kriging and sequential space conversion method | Mansour Ghalehnovi | 2022-1 |
Bioenergy production from the organic fraction of municipal solid waste and sewage sludge using mesophilic anaerobic co-digestion: An experimental and kinetic modeling study | Seyed Mohsen Karrabi | 2022-1 |
Laboratory Investigation of Using Calcium Lignosulfonate as an Oxidation Inhibitor in Bitumen | Jafar Bolouri Bazaz,Seyed Ali Ziaee | 2022-1 |
Multifunctional trace of various reinforcements on vibrations of three-phase nanocomposite combined hemispherical-cylindrical shells | Amirreza Masoodi | 2022-1 |
Rheological evaluation of asphalt binder modified by amorphous poly alpha olefin (APAO) | Jafar Bolouri Bazaz | 2022-1 |
Torsional behaviour of rectangular high-performance fibre-reinforced concrete beams | Mansour Ghalehnovi | 2022-1 |
بررسی آزمایشگاهی پارامترهای شکست تیر بتنی ساخته شده از ماده مرکب سیمانی مهندسی شده | Mohammad Reza Esfahani | 2022-1 |
Damage Detection in Largely Unobserved Structures under Varying Environmental Conditions: An AutoRegressive Spectrum and Multi-Level Machine Learning Methodology | Hashem Shariatmadar | 2022-2 |
Free vibration of axially functionally graded tapered micro-beams considering uncertain properties | Farzad Shahabian Moghadam | 2022-2 |
Lane‐Changing Trajectory Prediction Modeling Using Neural Networks | Rouzbeh Shad | 2022-2 |
Nonlinear dynamic analysis of FG/SMA/FG sandwich cylindrical shells using HSDT and semi ANS functions | Mohaamad Rezaiee Pajand | 2022-2 |
Probabilistic Active Control of Structures Using a Probabilistic Fuzzy Logic Controller | Hashem Shariatmadar,Farzad Shahabian Moghadam | 2022-2 |
Production of Environmentally Friendly Concrete Incorporating Bauxite Residue and Silica Fume | Mansour Ghalehnovi | 2022-2 |
Investigating the Effect of Calcium Lignosulfonate on the Durability and Performance of Asphalt Mixtures | Jafar Bolouri Bazaz,Seyed Ali Ziaee | 2022-3 |
Lateral-Torsional Buckling of a Bidirectional Exponentially Graded Thin-Walled C-Shaped Beam | Mohaamad Rezaiee Pajand,Amirreza Masoodi | 2022-3 |
Machine learning-based compressive strength modelling of concrete incorporating waste marble powder | Mansour Ghalehnovi | 2022-3 |
Nonlinear thermomechanical analysis of CNTRC cylindrical shells using HSDT enriched by zig-zag and polyconvex strain cover functions | Mohaamad Rezaiee Pajand | 2022-3 |
On the circumferential wave responses of connected elliptical-cylindrical shell-like submerged structures strengthened by nano-reinforcer | Amirreza Masoodi | 2022-3 |
بهینهسازی زمان فعالیت بالابر به کمک یک مدل ریاضی خطی در پروژههای ساختمانی مرتفع با در نظر گرفتن ریمه عدم رفع تقاضا | Mojtaba Maghrebi | 2022-3 |
Aging effect on the mixed-mode (I/III) fracture toughness of cement emulsified asphalt composite: Experimental and statistical investigation | Abolfazl Mohamadzadeh Moghaddam,Ali Sahaf | 2022-4 |
Effect of temperature and moisture on the bond strength betweenfiber reinforced polymerlaminates and cement‐based mortar substrates | Mohammadreza Tavakkolizadeh | 2022-4 |
Linear and nonlinear mechanical responses of FG-GPLRC plates using a novel strain-based formulation of modified FSDT theory | Mohaamad Rezaiee Pajand | 2022-4 |
Predictive model for slenderness limit of circular RC columns confined with FRP wraps | Mohammadreza Tavakkolizadeh | 2022-4 |
A precise splice-length model for reinforced concrete structures | Mohaamad Rezaiee Pajand | 2022-5 |
Affecting factors of double parking violations on urban trips | Rouzbeh Shad,Seyed Ali Ziaee | 2022-5 |
آنالیز آماری بافت تصاویر خرابی روسازی آسفالتی بر پایه ماتریس هم رخداد سطوح خاکستری | Ali Sahaf,Abolfazl Mohamadzadeh Moghaddam | 2022-5 |
Impact of Covid-19 Restrictions and Fuel Price on Traffic Volume and Offenses in Iran: A Spatiotemporal Analysis | Abolfazl Mohamadzadeh Moghaddam | 2022-5 |
Natural frequency analysis of FG-GOP/ polymer nanocomposite spheroid and ellipsoid doubly curved shells reinforced by transversely-isotropic carbon fibers | Amirreza Masoodi | 2022-5 |
Observational and statistical evaluation of factors affecting traffic noise: A case of tourist, pilgrimage and business area | Seyed Mohsen Karrabi,Abolfazl Mohamadzadeh Moghaddam | 2022-5 |
A comprehensive shell approach for vibration of porous nano-enriched polymer composite coupled spheroidal-cylindrical shells | Amirreza Masoodi | 2022-6 |
Geometric and Material Nonlinear Analyses of Trusses Subjected to Thermomechanical Loads | Mohaamad Rezaiee Pajand,Amirreza Masoodi | 2022-6 |
Influence of Magnetized Water on Mechanical Properties and Durability of Recycled Aggregate Concrete | Mohammad Reza Esfahani | 2022-6 |
Numerical and Experimental Assessment of Suspended Material Effects on Water Loss Reduction from Irrigation Channels | Mahmoud Faghfour Maghrebi | 2022-6 |
On vibrational-based numerical simulation of a jet engine cowl shell-like structure | Amirreza Masoodi | 2022-6 |
Optimal cluster number determination of FCM for unsupervised change detection in remote sensing images | Hossein Etemadfard | 2022-6 |
The Effect of GGBFS with Steel and Carbon Fibers on the Mechanical Properties and Durability of Concrete | Mohammad Reza Esfahani | 2022-6 |
Vibrational behavior of exponentially graded joined conical-conical shells | Mohaamad Rezaiee Pajand,Amirreza Masoodi | 2022-6 |
مقایسه تعداد لایههای تزیه موک تصویر به منظور کلاسبندی تمامخودکار بافت خرابیهای روسازی آسفالتی | Ali Sahaf,Abolfazl Mohamadzadeh Moghaddam | 2022-6 |
An explicit and highly accurate Runge-Kutta family | Mohaamad Rezaiee Pajand | 2022-7 |
Bioconversion of wheat straw to energy via anaerobic co-digestion with cattle manure in batch-mode bioreactors (Experimental investigation and kinetic modeling) | Seyed Mohsen Karrabi | 2022-7 |
Multipoint variable generalized displacement methods: Novel nonlinear solution schemes in structural mechanics | Farzad Shahabian Moghadam | 2022-7 |
Repair and retrofitting of external RC beam-to-column joints using the hybrid NSM + EBR method | Hashem Shariatmadar | 2022-7 |
Seismic assessment of irregular RC frames with tall ground story incorporating nonlinear soil–structure interaction | Amirreza Masoodi | 2022-7 |
Structural control of building with ATMD through AN-IT2FLC under seismic excitation | Hashem Shariatmadar | 2022-7 |
Unsaturated behaviour of gypseous sand soils using a modified triaxial test apparatus | Ali Akhtarpour | 2022-7 |
بررسی عددی رفتار لرزه ای سیستم دیوار بتنی پس کشیده مرکزگرا دارای میراگر اصطکاکی | Ahmad Shooshtari | 2022-7 |
A Spatio-Temporal autocorrelation model for designing a carshare system using historical heterogeneous Data: Policy suggestion | Mojtaba Maghrebi | 2022-8 |
Behavior of Axially and Eccentrically Loaded Trapezoidal Shell Footings Resting on a Granular Assembly | Saeed Abrishami | 2022-8 |
Behavior of volcanic ash–soil mixtures under one-dimensional compression testing | Saeed Abrishami | 2022-8 |
Edged Inverted Folded Plate Shell Strip Foundation Bearing Capacity Comparison with strip footing on Sandy Soil | Jafar Bolouri Bazaz | 2022-8 |
Effect of chloride and sulphate environments on the compressive strength density and electrical resistivity of ultra-high performance concrete (UHPC) | Mansour Ghalehnovi | 2022-8 |
Evaluating the Performance of a Solar Distillation Technology in the Desalination of Brackish Waters | Seyed Mohsen Karrabi | 2022-8 |
Performance of Structure Equipped AP‐TMD Compared with MTMD, ATMD, and PTMD against Earthquake Using Genetic Fuzzy Algorithm | Hashem Shariatmadar | 2022-8 |
Retrofitting of Core Reinforced Concrete Shear Wall System with Opening Using Steel Plates and FRP Sheets, A Case Study | Mansour Ghalehnovi | 2022-8 |
Stress-driven nonlinear behavior of curved nanobeams | Mohaamad Rezaiee Pajand | 2022-8 |
محاسبه پارامترهای میراگر رمی تنظیم شونده و بررسی عملکرد آن بر روی پل یکپارچه چهار دهانه | Ahmad Shooshtari | 2022-8 |
Behavior of concentrically braced steel frames under re loading | Abbas Karamodin | 2022-9 |
Development of a refined illumination and reflectance approach for optimal construction site interior image enhancement | Mojtaba Maghrebi | 2022-9 |
Experimental Study on Size Effect and Fracture Properties of Polypropylene Fiber Reinforced Lightweight Aggregate Concrete | Mohammad Reza Esfahani | 2022-9 |
Integration of a solar pond in a salt work in Sabzevar in Northeast Iran | Mohammad Reza Jaefarzadeh | 2022-9 |
On the frequencies of graphene nanoplatelet agglomerated nanocomposite paired paraboloidal-cylindrical shells under arbitrary boundary conditions | Amirreza Masoodi | 2022-9 |
On the Seismic Evaluation of Steel Frames Laterally Braced with Perforated Steel Plate Shear Walls Considering Semi-Rigid Connections | Amirreza Masoodi | 2022-9 |
A comparative study on measurement of lane-changing trajectory similarities | Rouzbeh Shad,Seyed Ali Ziaee | 2022-10 |
A Perforated High-Order Element for Fracture Mechanics Problems Using the Hybrid Strain Method | Mansour Ghalehnovi,Mohaamad Rezaiee Pajand | 2022-10 |
A unified scheme for nonlinear dynamic direct time integration methods: a comparative study on the application of multi-point methods | Farzad Shahabian Moghadam | 2022-10 |
An evaluation of MITC and ANS elements in the nonlinear analysis of shell structures | Mohaamad Rezaiee Pajand | 2022-10 |
Bond Behavior Investigation Between Steel Reinforced Grout Composites and Masonry Substrate | Mohammad Reza Esfahani | 2022-10 |
Bond strength characterization and estimation of steel fibre reinforced polymer - concrete composites | Mohammad Reza Esfahani | 2022-10 |
Effect of reclaimed asphalt pavement (RAP) on fracture properties of stone matrix asphalt (SMA) at low temperature | Ali Sahaf | 2022-10 |
Flow in Open and Closed Rectangular Channels with Moving Walls | Mahmoud Faghfour Maghrebi | 2022-10 |
Free-damped vibration analysis of Graphene Nano-Platelet nanocomposite Joined Conical-Conical-Cylindrical Shell marine-like structures | Amirreza Masoodi | 2022-10 |
Joint Slip Formulation for Members with Double Angle Section Based on Experimental Results in Wind Turbine Lattice Towers | Ahmad Shooshtari | 2022-10 |
Mixed mode-I/II fatigue performance of Cement Emulsified Asphalt Mortar: Experimental and statistical analysis at intermediate temperature | Abolfazl Mohamadzadeh Moghaddam,Ali Sahaf | 2022-10 |
Nonlinear thermomechanical analysis of GPLRC cylindrical shells using HSDT enriched by quasi-3D ANS cover functions | Mohaamad Rezaiee Pajand | 2022-10 |
Nonlinearity detection using new signal analysis methods for global health monitoring | Hashem Shariatmadar,Farzad Shahabian Moghadam | 2022-10 |
Wave frequency responses estimate of the nanocomposite linked hemispherical-conical shell underwater-like bodies with the impacts of two types of graphene-based nanofillers | Amirreza Masoodi | 2022-10 |
A novel assumed-strain finite element for detecting the elastic behavior of wall-like structures | Mohaamad Rezaiee Pajand | 2022-11 |
Characterization of collapsible gypsum sand soil with the presence of matric suction using a modified odometer apparatus | Ali Akhtarpour | 2022-11 |
Experimental study on the lateral cyclic response of the piles in sand | Jafar Bolouri Bazaz | 2022-11 |
Non-parametric empirical machine learning for short-term and long-term structural health monitoring | Hashem Shariatmadar | 2022-11 |
Tuning the Type-2 Fuzzy Controller for Active Control of Buildings Under Seismic Vibrations | Hashem Shariatmadar | 2022-11 |
A new damage detection approach under variable environmental or operational conditions | Mohammad Reza Esfahani,Farzad Shahabian Moghadam | 2022-12 |
Circumferential vibration analysis of nano-porous-sandwich assembled spherical-cylindrical-conical shells under elastic boundary conditions | Amirreza Masoodi | 2022-12 |
Context-aware similarity measurement of lane-changing trajectories | Rouzbeh Shad | 2022-12 |
Effects of Small Deviations in Fiber Orientation on Compressive Characteristics of Plain Concrete Cylinders Confined with FRP Laminates | Mohammadreza Tavakkolizadeh | 2022-12 |
Experimental and statistical exploring for mixed-mode (I&II) fracture behavior of cement emulsified asphalt mortar under freeze–thaw cycles and aging condition | Abolfazl Mohamadzadeh Moghaddam,Ali Sahaf | 2022-12 |
Hydrodynamic forces on emergent cylinders in non-uniform flow | Mahmoud Faghfour Maghrebi | 2022-12 |
Nonlinear Regression Prediction of Mechanical Properties for SMA-Confined Concrete Cylindrical Specimens | Mohammadreza Tavakkolizadeh,Amirreza Masoodi | 2022-12 |
Spatiotemporal Variations of Air Pollution during the COVID-19 Pandemic across Tehran, Iran: Commonalities with and Differences from Global Trends | Seyed Mohsen Karrabi | 2022-12 |
The effect of recycled steel fibers from waste tires on concrete properties | Mansour Ghalehnovi | 2022-12 |
The Effects of MTMD and HBI on the Performance of a Benchmark Building Against Near-Field Earthquakes Using Fuzzy Logic | Hashem Shariatmadar | 2022-12 |
Discharge estimation and rating curve derivation, using satellite geometry data and isovel contours at Karun River, Iran | Mahmoud Faghfour Maghrebi | 2023-1 |
Effect of using Engineered Cementitious Composites (ECC) on failure behavior of flat slab-column connections | Mohammad Reza Esfahani | 2023-1 |
Fracture characteristics of various concrete composites containing polypropylene fibers through five fracture mechanics methods | Mohammad Reza Esfahani | 2023-1 |
Free vibration of porous graphene oxide powder nano-composites assembled paraboloidal-cylindrical shells | Amirreza Masoodi | 2023-1 |
Illegal Maneuver Effect on Traffic Operations at Signalized Intersections: An Observational Simulation-Based Before-After Study Using Response Surface Methodology | Abolfazl Mohamadzadeh Moghaddam | 2023-1 |
Low and intermediate temperatures fracture behavior of amorphous poly alpha olefin (APAO)-modified hot mix asphalt subjected to constant and variable temperatures | Seyed Ali Ziaee,Rouzbeh Shad | 2023-1 |
Numerical and experimental investigation on seismic performance of proposed steel slit dampers | Ahmad Shooshtari | 2023-1 |
Numerical study of a novel SMA-based self-centering beam-to-column connection | Hashem Shariatmadar | 2023-1 |
Performance evaluation of Modified Tuned Liquid Dampers for seismic response control of nonlinear benchmark buildings | Abbas Karamodin | 2023-1 |
Performance of RC beam-column joints with hybrid GFRP-steel reinforcement under cyclic and axial loads | Mohammad Reza Esfahani | 2023-1 |
Robust decision-making by a new statistical feature extraction method reliable to noise and uncertainty | Hashem Shariatmadar | 2023-1 |
The effect of tensile reinforcement on the behavior of CFRP strengthened reinforced concrete beams: An experimental and analytical study | Mohammad Reza Esfahani | 2023-1 |
Comparing type-1, interval and general type-2 fuzzy approach for dealing with uncertainties in active control | Hashem Shariatmadar | 2023-2 |
Differential quadrature technique for frequencies of the coupled circular arch–arch beam bridge system | Amirreza Masoodi | 2023-2 |
Evaluation of long-term fracture behavior of amorphous poly alpha olefin (APAO)-modified Hot Mix Asphalt (HMA) under modes I and II at low and intermediate temperatures | Seyed Ali Ziaee | 2023-2 |
Free vibration analysis of saturated porous circular micro-plates integrated with piezoelectric layers; differential transform method | Farzad Shahabian Moghadam,Ahmad Aftabi Sani | 2023-2 |
Investigating the Role of Clustering in Construction-Accident Severity Prediction Using a Heterogeneous and Imbalanced Data Set | Hossein Etemadfard,Mansour Ghalehnovi | 2023-2 |
Mitigating alkali-silica reaction in cement mortars through microbial carbonate precipitation technique | Abolfazl Mohamadzadeh Moghaddam,Seyed Mohsen Karrabi | 2023-2 |
Optimization of stone matrix asphalt mixture design based on fracture mechanics approach | Ali Sahaf | 2023-2 |
Predicting self-reported driving speed compliance with the bi-dimensional attitudes | Abolfazl Mohamadzadeh Moghaddam | 2023-2 |
Recycled steel fiber for fiber reinforced concrete production: fresh and hardened properties, cost, and ecological assessments | Mansour Ghalehnovi | 2023-2 |
Shear strengthening of RC beams using FRCM system made with industrial wastes | Mohammad Reza Esfahani | 2023-2 |
Comparison of various machine learning algorithms used for compressive strength prediction of steel fiber-reinforced concrete | Mansour Ghalehnovi | 2023-3 |
Effect of Marble Waste Powder and Silica Fume on the Bond Behavior of Corroded Reinforcing Bar Embedded in Concrete | Mansour Ghalehnovi | 2023-3 |
Minimizing rebar cost using design and construction integration | Mojtaba Maghrebi | 2023-3 |
On the damping influence on the dynamic analysis of functionally graded beams resting on elastic foundation by Green’s function method | Mohaamad Rezaiee Pajand | 2023-3 |
Optimization of asphalt mixture design using response surface method for stone matrix warm mix asphalt incorporating crumb rubber modified binder | Ali Sahaf | 2023-3 |
The Strength, Microstructure, and ecological assessment of concrete mix incorporating waste glass powder and polypropylene fiber | Mansour Ghalehnovi | 2023-3 |
Calm down, please!: Exploring the effects of driving anger expression (DAX) on traffic locus of control (T-LOC) and crash involvement among drivers in Tehran, Iran | Abolfazl Mohamadzadeh Moghaddam | 2023-4 |
Cationic asphalt emulsion as an additive of RCC Pavement: Exploring for Mode-I fracture behavior and dynamic modulus properties | Abolfazl Mohamadzadeh Moghaddam | 2023-4 |
Measuring lane-changing trajectories by employing context-based modified dynamic time warping | Rouzbeh Shad | 2023-4 |
A comprehensive review on biogas production from lignocellulosic wastes through anaerobic digestion: An insight into performance improvement strategies | Seyed Mohsen Karrabi | 2023-5 |
Boundary shear stress distribution in straight open trapezoidal channels using velocity distribution | Mahmoud Faghfour Maghrebi | 2023-5 |
Evaluation of rheological and mechanical properties of hot and warm mix asphalt mixtures containing Electric Arc Furnace Slag using gyratory compactor | Seyed Ali Ziaee | 2023-5 |
Optimization of CLS Content of Asphalt Mixtures Based on Balanced Mix Design Approach | Seyed Ali Ziaee | 2023-5 |
TX-100 adsorption from aqueous solution using modified graphene oxide; optimization by response surface methodology and one factor at a time techniques | Shanaz Danesh | 2023-5 |
A study on the near and far-field earthquake response of a low and mid-rise building resting on soft soil considering soil–structure interaction (SSI) | Ali Akhtarpour | 2023-6 |
Addressing practical challenge of using autopilot drone for asphalt surface monitoring: Road detection, segmentation, and following | Mojtaba Maghrebi | 2023-6 |
Comparison of the mechanical performance of concrete reinforced with recycled steel fibers from waste tires and hooked-end steel fibers at ambient and high temperatures | Mansour Ghalehnovi | 2023-6 |
Estimation of the groundwater recharge coefficient by minimizing the sum total error of a regional water balance | Seyed Mahmood Hosseini | 2023-6 |
Experimental Investigation of the Volume Change of a Swelling Clay and Its Improvement | Ali Akhtarpour | 2023-6 |
Free-damped vibration tangential wave responses of FG-sandwich merged hemispherical-cylindrical shells under effects of artificial springs at merging and boundary conditions | Amirreza Masoodi | 2023-6 |
Investigation of stage‐discharge model performance for streamflow estimating: A case study of the Gono River, Japan | Mahmoud Faghfour Maghrebi | 2023-6 |
Predictive models for the peak stress and ultimate strain of FRP confined concrete cylinders with inclined fiber orientations | Mohammadreza Tavakkolizadeh | 2023-6 |
Tracking indoor construction progress by deep-learning-based analysis of site surveillance video | Mojtaba Maghrebi | 2023-6 |
Determining flood source areas in watersheds using data-driven models and a geographic information system | Seyed Mahmood Hosseini | 2023-7 |
Experimental evaluation of post-tensioned hybrid coupled shear wall system with TADAS steel dampers at the beam-wall interface | Mohammad Reza Esfahani | 2023-7 |
Strengthening of reinforced concrete beams using fiber-reinforced cementitious matrix systems fabricated with custom-designed mortar and fabrics | Mohammad Reza Esfahani | 2023-7 |
A novel method for modal analysis of dam-reservoir systems | Mohaamad Rezaiee Pajand | 2023-8 |
A robust approach for the derivation of rating curves using minimum gauging data | Mahmoud Faghfour Maghrebi | 2023-8 |
Analytical 2D model for the liquid storage rectangular tank | Mohaamad Rezaiee Pajand | 2023-8 |
Enhancing Mechanical Behavior and Energy Dissipation in Fiber-Reinforced Polymers through Shape Memory Alloy Integration: A Numerical Study on SMA-FRP Composites under Cyclic Tensile Loading | Mohammadreza Tavakkolizadeh,Amirreza Masoodi | 2023-8 |
Mixed mode (I&III) fracture behavior of cement emulsified asphalt mortar under freeze and thaw cycles | Abolfazl Mohamadzadeh Moghaddam,Ali Sahaf | 2023-8 |
Reliability analysis of controlled structures based on probabilistic active controller | Hashem Shariatmadar | 2023-8 |
کنترل نیمه فعال سازه سه طبقه محک به کمک شبکه سنسورهای بیسیم | Abbas Karamodin | 2023-8 |
A Comparative Study on Forecasting of Long-term Daily Streamflow using ANN, ANFIS, BiLSTM and CNN-GRU-LSTM | Hossein Etemadfard,Mahmoud Faghfour Maghrebi,Rouzbeh Shad | 2023-9 |
A new analytical model to predict the effect of suction removal on vacuum preloading of fine copper tailings | Jafar Bolouri Bazaz | 2023-9 |
A numerical study on the seismic design of buildings seated over an RSM layer | Ehsan Seyedi Hosseininia | 2023-9 |
Efficient removal of Triton X-100 from water samples by graphene oxide-humic acid nanocomposite | Shanaz Danesh | 2023-9 |
Innovations and advancements in concrete-encased steel shear walls: A comprehensive review | Mansour Ghalehnovi | 2023-9 |
Numerical investigation of liquefaction-induced settlement and instability on earth dams | Ali Akhtarpour | 2023-9 |
Prediction model for drivers' tendency to perpetrate a double parking violation on urban trips | Rouzbeh Shad,Seyed Ali Ziaee | 2023-9 |
Prioritizing Safety Climate Improvements in the Indonesian Construction Industry Using Supervised Classification | Mojtaba Maghrebi | 2023-9 |
Combination of Optimal Three-Step Composite Time Integration Method with Multi-Point Iterative Methods for Geometric Nonlinear Structural Dynamics | Farzad Shahabian Moghadam | 2023-10 |
Influence of shape memory alloy on seismic behaviour of hollow-section concrete columns | Hassan Haji Kazemi,Amirreza Masoodi | 2023-10 |
Introduction of calcium lignosulfonate to delay aging in bituminous mixtures | Seyed Ali Ziaee | 2023-10 |
Magnesium nanoparticle modified cement-based composites: Performance and compatibility in repair applications | Mohammad Reza Esfahani | 2023-10 |
Optimum seismic design of frame structures with and without metallic yielding dampers considering life-cycle cost | Abbas Karamodin | 2023-10 |
Performance Based Review and Fine-Tuning of TRM-Concrete Bond Strength Existing Models | Mohammad Reza Esfahani | 2023-10 |
Road traffic mortality in Iran: longitudinal trend and seasonal analysis, March 2011-February 2020 | Abolfazl Mohamadzadeh Moghaddam | 2023-10 |
Seismic collapse safety assessment of suspended zipper-braced frames | Abbas Karamodin | 2023-10 |
A study on the seismic soil − structure interaction of a concrete shear wall − steel frame building system with underground stories | Ali Akhtarpour | 2023-11 |
Effects of constitutive soil models on the seismic response of an offshore jacket platform in clay by considering pile-soil-structure interaction | Jafar Bolouri Bazaz,Ali Akhtarpour | 2023-11 |
Ensemble of Support Vector Machines for spectral-spatial classification of hyperspectral and multispectral images | Rouzbeh Shad | 2023-11 |
Modifications to the Single Point Velocity Measurement Method for Estimating River Discharge in Low-Resource Environments | Mahmoud Faghfour Maghrebi | 2023-11 |
Spatio-temporal Analysis of Precipitation Effects on Bicycle-Sharing Systems with Tensor Approach | Hossein Etemadfard | 2023-11 |
Analysis of the gasoline consumption on an international scale: A data mining approach | Seyed Ali Ziaee | 2023-12 |
Closed-form analytical solution for infinite-depth seepage below diversion dams considering the width of cutoff wall | Mahmoud Faghfour Maghrebi | 2023-12 |
Comparison Between EBR Method and a NSM New Technique for Strengthening Concrete Beam–Column Joints | Hashem Shariatmadar | 2023-12 |
Effect of Geogrid Reinforcement and Soil Relative Density on Performance and Contact Pressures of Ring Foundations on Sand | Saeed Abrishami | 2023-12 |
Employing GDQ method for exploring undamped vibrational performance of CNT-reinforced porous coupled curved beam | Amirreza Masoodi | 2023-12 |
Improving composite cable performance: Nonlinear thermo-elastic analysis with temperature-dependent pretension and 3D cable elements | Amirreza Masoodi | 2023-12 |
Optimal design of friction tuned mass damper for seismic control of an integral bridge | Ahmad Shooshtari | 2023-12 |
Predicting fracture behavior (mixed‐modes I/III) of cement asphalt mortar under fatigue and static loading conditions using response surface method | Abolfazl Mohamadzadeh Moghaddam,Ali Sahaf | 2023-12 |
Pullout capacity of horizontal circular plates embedded in sand using the method of stress characteristics | Ehsan Seyedi Hosseininia | 2023-12 |
The effect of recycled-tire steel fiber and engineered steel fiber on rebar corrosion and shear behavior of corroded RC beam | Mansour Ghalehnovi | 2023-12 |
The potential of CO2 emission reduction via replacing cement with recyclable wastes in the construction industry sector: the perspective of Iran’s international commitments | Seyed Mohsen Karrabi,Abolfazl Mohamadzadeh Moghaddam | 2023-12 |
Unveiling the potential of an evolutionary approach for accurate compressive strength prediction of engineered cementitious composites | Amirreza Masoodi | 2023-12 |
Vibration analysis of tanks resting on Winkler and Pasternak foundations | Mohaamad Rezaiee Pajand | 2023-12 |
A Modified Strain Softening–Hardening Constitutive Model for Plastic Concrete Cut-off Wall | Ali Akhtarpour | 2024-1 |
Automated actual evapotranspiration estimation: Hybrid model of a novel attention based U-Net and metaheuristic optimization algorithms | Ali Abbasi | 2024-1 |
Cyclic and Monotonic Behavior of Non-plastic Silts with the Presence of Initial Static Shear Stress Using Strain Energy Approach: A Case Study for a Tailings Dam | Jafar Bolouri Bazaz,Ali Akhtarpour | 2024-1 |
Effects of Cement Treatment on Water Retention Behavior and Collapse Potential of Gypseous Soils: Experimental Investigation and Prediction Models | Ali Akhtarpour | 2024-1 |
Identifying Construction Managers’ Challenges: A Novel Approach Based on Social Network Analysis | Mojtaba Maghrebi | 2024-1 |
Natural Frequency Response of FG-CNT Coupled Curved Beams in Thermal Conditions | Amirreza Masoodi | 2024-1 |
Thermal Frequency Analysis of Double CNT-Reinforced Polymeric Straight Beam | Amirreza Masoodi | 2024-1 |
Biogenic synthesis of copper oxide nanoparticles using a cold tolerant bacterium for RB5/DR23 Azo dye adsorption | Seyed Mohsen Karrabi | 2024-2 |
Chemical conditioning of aerobically digested sludge using polyelectrolytes with different charge densities | Shanaz Danesh | 2024-2 |
Comparative Analysis of Different Accessibility to Transportation Stations Gap Indices | Rouzbeh Shad,Seyed Ali Ziaee | 2024-2 |
Effect of initial fabric anisotropy on cyclic liquefaction behavior of granular soils using discrete element method | Ehsan Seyedi Hosseininia | 2024-2 |
Global building life cycle assessment: Comparative study of steel and concrete frames across European Union, USA, Canada, and Australia building codes | Seyed Mohsen Karrabi,Mojtaba Maghrebi | 2024-2 |
Parametric Study on the Behavior of Deep Cylindrical Excavationsin Saturated Clay | Saeed Abrishami | 2024-2 |
Seismic performance of rubber-sand mixture as a geotechnical seismic isolation system using shaking table test | Ehsan Seyedi Hosseininia | 2024-2 |
Unsupervised damage assessment under varying ambient temperature based on an adjusted artificial neural network and new multivariate covariance-based distances | Hashem Shariatmadar | 2024-2 |
Assessment of aviation accident datasets in severity prediction through machine learning | Hossein Etemadfard,Rouzbeh Shad | 2024-3 |
Conformal and approximate analysis of the effect of cutoff wall thickness on finite depth seepage characteristics | Mahmoud Faghfour Maghrebi | 2024-3 |
Hybrid methods for solving structural geometric nonlinear dynamic equations: Implementation of fifth-order iterative procedures within composite time integration methods | Farzad Shahabian Moghadam | 2024-3 |
Seismic bearing capacity of strip footings placed on reinforced soil slopes using slip line method | Ehsan Seyedi Hosseininia | 2024-3 |
A Numerical Investigation on the Mechanical Behavior of Cemented Sand with Angular Particles by Using DEM | Ehsan Seyedi Hosseininia | 2024-4 |
Application of a functionalized thin-film composite nanofiltration membrane in water desalination | Seyed Mohsen Karrabi | 2024-4 |
Bi-level integration of discrete-event simulation (DES) and social force modeling (SFM) for construction labor productivity | Mojtaba Maghrebi | 2024-4 |
Development and optimisation of green lightweight engineered cementitious composite containing industrial wastes using response surface methodology | Mohammad Reza Esfahani | 2024-4 |
Effects of climate change on streamflow in the Dez Basin of Iran using the IHACRES model based on the CMIP6 model | Mohammadreza Goodarzi | 2024-4 |
Enhancing the water quality index for assessing sustainable water resources in the Abarkuh aquifer | Mohammadreza Goodarzi | 2024-4 |
Estimating streamflow by an innovative rating curve model based on hydraulic parameters | Mahmoud Faghfour Maghrebi | 2024-4 |
Evolution of Elastic Shear Modulus During Shearing Under Different Stress Paths Considering Anisotropic Stress History | Ali Akhtarpour,Jafar Bolouri Bazaz | 2024-4 |
Experimental exploration of fracture behavior (pure mode III) in eco-friendly steel fiber-reinforced self-compacting concrete with waste tempered glass as coarse aggregates | Saeed Abrishami,Amirreza Masoodi | 2024-4 |
Structural Damage Detection in the Wooden Bridge Using the Fourier Decomposition Time Series Modeling and Machine Learning Methods | Farzad Shahabian Moghadam,Hashem Shariatmadar | 2024-4 |
A comparison between the behavior of beams strengthened by FRP sheets and FRCM composites | Mohammad Reza Esfahani | 2024-5 |
A Simple Iterative Method for Dynamic Analysis of MDOF Systems with Arbitrary Time-Varying Coefficients Based on Successive Differentiation | Ahmad Aftabi Sani,Mohammadreza Tavakkolizadeh | 2024-5 |
Assessing the impact of COVID-19 lockdowns on water quality in Anzali Wetland, Iran, using remote sensing data | Mohammadreza Goodarzi | 2024-5 |
Hyperparameters’ role in machine learning algorithm for modeling of compressive strength of recycled aggregate concrete | Hossein Etemadfard,Mansour Ghalehnovi | 2024-5 |
Hysteresis-influenced stage-discharge rating curve based on isovel contours and Jones formula | Mahmoud Faghfour Maghrebi | 2024-5 |
The effect of sand-crumb rubber mixture treatment on the seismic response of a low-rise building located on liquefiable soil | Ali Akhtarpour | 2024-5 |
بررسی فرسایش داخلی در رسوبات آبرفتی با دانه بندی گسسته | Ali Akhtarpour,Jafar Bolouri Bazaz | 2024-5 |
A comparison of machine learning methods for estimation of snow density using satellite images | Mohammadreza Goodarzi | 2024-6 |
Anaerobic co-digestion of lignocellulosic/lipidic wastes with cattle manure: Investigating biogas production and methane yield | Seyed Mohsen Karrabi | 2024-6 |
Application of the Green's function method for static analysis of nonlocal stress-driven and strain gradient elastic nanobeams | Abbas Karamodin,Ahmad Aftabi Sani | 2024-6 |
Free vibration analysis of soil-beam-fluid interaction with variable Winkler backfill using DTM | Mohaamad Rezaiee Pajand | 2024-6 |
Hydraulic Conductivity Estimation: Comparison of Empirical Formulas Based on New Laboratory Experiments | Mohammadreza Goodarzi | 2024-6 |
Optimization of Fracture and Moisture Damage Resistance of Stone Matrix Asphalt Mixtures Containing Crumb Rubber-Modified Binder with the Fracture Mechanics Approach | | 2024-6 |
A comprehensive comparison of various machine learning algorithms used for predicting the splitting tensile strength of steel fiber-reinforced concrete | Mansour Ghalehnovi | 2024-7 |
ارزیابی تاثیر ۱۰PM بر تغییرات NDVI بر اساس پردازش تصاویر ماهواره ای در استان خوزستان | Rouzbeh Shad,Shanaz Danesh | 2024-7 |
Dimensioning equivalent of circular footing subjected to eccentric load with effective area approach | Saeed Abrishami | 2024-7 |
Dynamic examination of closed cylindrical shells utilizing the differential transform method | Farzad Shahabian Moghadam,Ahmad Aftabi Sani | 2024-7 |
Experimental investigation of dewatering silty tailings using electrokinetic method | Ali Akhtarpour | 2024-7 |
Inherent resonance of carbon and graphene-based nanocomposite coupled single-span arch beams | Amirreza Masoodi | 2024-7 |
Laboratory investigation on the fracture toughness (Mode I) and durability properties of eco-friendly cement emulsified asphalt mortar (CRTS II) exposed to acid attack | Ali Sahaf | 2024-7 |
Multi-output machine learning for predicting the mechanical properties of BFRC | Hossein Etemadfard,Mansour Ghalehnovi | 2024-7 |
Rehabilitation of reinforced concrete beam: Sustainable restoration mortar with waste materials | Mohammad Reza Esfahani,Amirreza Masoodi | 2024-7 |
A family of minimum residual displacement methods as nonlinear solution schemes for equilibrium path-following in structural mechanics | Ahmad Shooshtari | 2024-8 |
Computerized cognitive training to improve executive functions and driving skills of adolescents with and without symptoms of attention-deficit/hyperactivity disorder | Abolfazl Mohamadzadeh Moghaddam | 2024-8 |
Factors affecting the bond behavior of corroded rebars embedded in ultra-high-performance concrete | Mansour Ghalehnovi | 2024-8 |
Spatio-temporal analysis of COVID-19 lockdown effect to survive in the US counties using ANN | Hossein Etemadfard | 2024-8 |
The exact bearing capacity of strip footings on reinforced slopes using slip line method | Ehsan Seyedi Hosseininia | 2024-8 |
Autopilot drone in construction: A proof of concept for handling lightweight instruments and materials | Mojtaba Maghrebi | 2024-9 |
ارزیابی روانگرایی مصالح ریزدانه سیلتی با استفاده از روش مبتنی بر انرژی کرنشی (مطالعه موردی سد باطله مس سونگون) | Jafar Bolouri Bazaz,Ali Akhtarpour | 2024-9 |
Cost Performance Modeling for Steel Fabrication Shops with Machine Learning Algorithms | Hossein Etemadfard,Mansour Ghalehnovi | 2024-9 |
Free vibration analysis of closed and open horizontal cylindrical shells utilizing coupled transfer function method and differential transform method | Mohammadreza Tavakkolizadeh,Ahmad Aftabi Sani | 2024-9 |
Investigation of torsion in asymmetric mid-rise structures on the pile-raft system considering soil-structure interaction | Ali Akhtarpour | 2024-9 |
Multiscale analysis of carbon nanotube-reinforced curved beams: A finite element approach coupled with multilayer perceptron neural network | Amirreza Masoodi | 2024-9 |
An Unsaturated Soil Mechanics-Based Numerical and Experimental Method to Assess Soil Settlement Due to Ground Water Level Rise | Ali Akhtarpour | 2024-10 |
Experimental study to unraveling the seismic behavior of CFRP retrofitting composite coupled shear walls for enhanced resilience | Amirreza Masoodi,Mansour Ghalehnovi | 2024-10 |
Long-term Deformation Mechanism of Masjed-e-Soleyman High Rockfill Dam | Ali Akhtarpour | 2024-10 |
Risk Assessment of Urban Water and Energy Supply Using Copula Function: A Water–Energy Nexus Approach in an Arid City | Mohammadreza Goodarzi | 2024-10 |
Intercomparison of machine learning methods for statistical downscaling of daily temperature under CMIP6 scenarios: a case study from Iran | Mohammadreza Goodarzi | 2024-11 |
Long-term effectiveness of green roofs in building sustainability through carbon emission and sequestration | Seyed Mohsen Karrabi | 2024-11 |
User preferences in ride-sharing mathematical models for enhanced matching | Abolfazl Mohamadzadeh Moghaddam | 2024-11 |
Bioenergy recovery from waste engine oil through anaerobic co-digestion with sewage sludge: Effects of total solids and inoculum to substrate ratio | Seyed Mohsen Karrabi | 2024-12 |
Bond-slip relationship between deformed rebar and ultra-high-performance concrete with corrosion effect | Mansour Ghalehnovi | 2024-12 |
Calibration and Uncertainty Analysis for Isovel Contours-based Stage-discharge Rating Curve by Sequential Uncertainty Fitting (SUFI-2) Method | Mahmoud Faghfour Maghrebi | 2024-12 |
Comparison of different machine learning methods in river streamflow estimation using isovel contours and hydraulic variables | Mahmoud Faghfour Maghrebi | 2024-12 |
Free vibration analysis of Euler-Bernoulli beams modeled by spatial-fractional differential equation | Ahmad Aftabi Sani | 2024-12 |
Influence of Load Eccentricity on Performance and Contact Pressures of Ring Foundations on Geogrid-Reinforced Sand | Saeed Abrishami | 2024-12 |
Multiscale dynamic behavior of imperfect hybrid matrix/fiber nanocomposite nested conical shells with elastic interlayer | Amirreza Masoodi,Ehsan Seyedi Hosseininia | 2024-12 |
Numerical and experimental study of the interaction between surface swelling soil and gas well casing, based on unsaturated soil mechanics | Ali Akhtarpour | 2024-12 |
Self-healing cold mix asphalt containing steel slag: A sustainable approach to cleaner production | Abolfazl Mohamadzadeh Moghaddam | 2024-12 |
تحلیل اندرکنش خاک ـ سازه برای ساختمان بلند مجاور گود عمیق | Ali Akhtarpour,Jafar Bolouri Bazaz | 2024-12 |